Air hose leaking from LP reg to solinoid

[Omega6_Virus]

Okay. I was playing thurs and friday and friday I heard a small leak in my gun. Today I put my gauge on and my LP is really low, when I turn it up more air leaks inside. When I play around with the hose I hear more or less air. I am putting the gun back together right now and I plan on sending it to bob but I will call first. The thing is the air line going from the LP reg to the solinoid is too short for me to put it back on. Dont ask why I took it off. Should I buy more line(longer) or should I put it together and send it to bob? When I call bob what info should I have ready? What do you guys think could be a problem for the leak? Thanks

[SH4YD33]

yeah the hose will seem like its small but its because its cut the exact size to fit. use some eye lash like plucker things to get it in there. i did that when i took my reg housing off. now.. i really would recomend replacing your hose to the solinoid greasing your poppet greasing your reg greasing your pin valve. and changing the o rings in the lp reg. if that dosent work.. then call bob. to me.. it sounds like it has something to do with the pin valve.

[CountyPaintball]

That hose can be tricky to put on, because it's just barely long enough. One thing that helps me is to put the gun on the table upside down and put that hose on first. If you try doing it with the other hoses already connected, it's almost impossible. I use a pair of needlenose pliars.

Good luck.

Mike

[Morphious]

Also the hose is just Autococker Hose. Kapp has it in stock as well as probably Most Paintball Stores.

[CountyPaintball]

We have it to. Sold by the foot.

http://www.countypaintball.com/product_description.asp?item=1702

Mike