T.E.S. trigger pull mod thing...

[p41ntballjunkie]

i was changing the battery today on the tes and i found these 2 little crews that look like they can adjust the pull of the trigger....is that what those screws do and could anyone show me how to lighten the pull>?

"EDIT" i want to know how to eliminate that stupid trigger wiggle too.....any info would be awsome...but yeah....i needa shorter pull and less wiggling around...if i can get rid of the wiggle things should be good

[schoolsukz08]

By "wiggle" I'm guessing thats side to side "wiggle" and you can fix that by taking off your trigger and putting small spacers on each side.

[p41ntballjunkie]

yeah side to side.....but do you know anything about those 2 little screws?

and how do i get in there to fix the wiggle?

[schoolsukz08]

Originally posted by p41ntballjunkie
yeah side to side.....but do you know anything about those 2 little screws?

Where are the 2 little screws located? Pictures would be even better.

[p41ntballjunkie]

ummill try a picture...they;re kinda big but ill try it out....and yeah hang on

[p41ntballjunkie]

ok pictures cant be resized...and terible quality so yeah ill describe it to you...when you take off the front grip...the side with the lcd theres these 2 little screws to the left of the noid just behind thetop of the trigger,,, is that how you take it apart or is it for the trigger?

[schoolsukz08]

Originally posted by p41ntballjunkie
ok pictures cant be resized...and terible quality so yeah ill describe it to you...when you take off the front grip...the side with the lcd theres these 2 little screws to the left of the noid just behind thetop of the trigger,,, is that how you take it apart or is it for the trigger?

Thats to hold the noid in.

[p41ntballjunkie]

so theres no way to mod the pull of the trigger?

[schoolsukz08]

Originally posted by p41ntballjunkie
so theres no way to mod the pull of the trigger?

Sure there is. What do you want to adjust on the trigger? (Or be able to adjust)

[p41ntballjunkie]

because theres allot of dead space that i wanna get rid of...its an easy pull but its just anoying for some reason...obsesive compulsive or somthingbut do you know how to?

[schoolsukz08]

Originally posted by p41ntballjunkie
because theres allot of dead space that i wanna get rid of...its an easy pull but its just anoying for some reason...obsesive compulsive or somthingbut do you know how to?

You mean like when you tilt you gun forward the trigger will fall forward too. If so take a clicky pen and take out the spring, cut it down to like 3 or 4 coils then fit it in front of the trigger and push down. I use jewelers screw drivers to push it down but you can use any small object similar to push it down. Just tell me if I confused you. Does your gun have a plastic trigger?

[p41ntballjunkie]

umm justa stock tes nothing special...so a pen spring where?

[schoolsukz08]

Originally posted by p41ntballjunkie
umm justa stock tes nothing special...so a pen spring where?

Okay but is your trigger metal or plastic? The pen spring goes between (looking at top of frame) The top part of the trigger and edge of frame, wedged between the too. Also push down until the trigger is resting on the micro switch.

[p41ntballjunkie]

umm well im pretty sure its metal.... and umm would putting somthing on the little thing the trigger hits lighten the pull?

[schoolsukz08]

Originally posted by p41ntballjunkie
umm well im pretty sure its metal.... and umm would putting somthing on the little thing the trigger hits lighten the pull?

You mean the mirco switch. There are a few mods to make it lighter or you could just get a new one all together.

[p41ntballjunkie]

no im not gonna spend any more money on it cuz im saving for a trix

[schoolsukz08]

Originally posted by p41ntballjunkie
no im not gonna spend any more money on it cuz im saving for a trix

Haha, can't you take $10 out of the fund. BTW good choice with the trix, I've had nothing but good things with them.

[p41ntballjunkie]

yeah im getting it cheap too like 1250 canadian...and do you have msn...im getting bored of this forum posting convo thinger.....butyeh what would be the cheapest way to mod my trigger?like a piece of wood or metal or somthing?

[schoolsukz08]

Originally posted by p41ntballjunkie
yeah im getting it cheap too like 1250 canadian...and do you have msn...im getting bored of this forum posting convo thinger.....butyeh what would be the cheapest way to mod my trigger?like a piece of wood or metal or somthing?

I don't have msn. I do have AIM though. Just click the little AIM icon at the bottom of my post. (I'm always on) But the cheapest way is the pen spring thing I told you about.

[p41ntballjunkie]

just a pen spring at it will push on the switch?