Max-Flow Question

[-RuShPB227-]

Where you tighten the bottom part where you adjust the pressure, I can see in a little bit and it looks like a liitle bit of rust in there. Is this a problem? I think it might be from the condensation of my c02 in there. If this is a problem, what should i do. my impy is still in warranty.

[Killer Kat]

Remember! Rust never sleeps! Think of it this way, You brush your teeth!, If she's rusting, you aren't cleaning and lubricating your marker often enough. You clean off rust and lube it, often! Make sure that you lube your Impulse with dow-33 for the internals (anything else will hurt your marker), However if you've got rust on the threaded part of the reg, I'd take it all apart and really dose it up with alot of Dow! Protect your investment.

[-RuShPB227-]

in the manual it says to clean the reg every month. how do i get the rust off? HELP!

[mInImAg169]

sandpaper,my friend.

[ds613]

It's probly not rust.

[-RuShPB227-]

its just the sring. still, i am going to try to get it off.

[Weasel00]

That is strange that you have rust on your spring. I have played in heavy rain and used CO2 so my Max Flo was one big Ice sickle and I have not seen any rust. Take some light sandpaper and sand the rust down. If it is to deep let it go. If you want to prevent rust then take a little bit of oil and wipe it all over the spring. You just need a little bit though.

Jared

[-RuShPB227-]

thanks weasel, my fellow impy brother!