What's the quickest way to clean a break?

[Puddleglum]

Every once in a while I'll break a ball. Then I have to quickly clean my gun while trying not to get hit. I remove the barrel and squeegie it out, but what should I do then. I still have paint in the porting, on the bolt, and in the feeder. I just need a quick way to get back up and running again.

[Shifty Capone]

you could try runnin the squegee through the feed and down thru were the barrel comes out

[mInImAg169]

If you break one in the chamber, the game is over for you, unless you want to waste 5 minutes behind a bunker.

[AllOleander]

you take the barrel off to squeegee???

I say just squeegee w/ the barrel on, and then tip yoru gun upside down and dry fire a few shots. And if you have some in the porting you can cover the end of the barrel w/ the gun upside down (enless you have a warp feed of course :D ) and it shoud clear the porting somewhat.

If it broke in the chamber and you cant shoot through the break, the game is over for you as minimag said. :)

[Halliday]

Porting: not a big deal
Barrel: Battle Swab
Powerfeed: Battle Swab
Bolt: Wait until the end of the game

[mInImAg169]

Wat, p/f in the middle of a game? NO. If you don't isolate it, and clean it, then every time you shoot the balls will break, and paint will be all in the chamber, plus you have to take the plug out. NO WAY youcan do it in the middle of a game.

[Halliday]

Originally posted by mInImAg169
Wat, p/f in the middle of a game? NO. If you don't isolate it, and clean it, then every time you shoot the balls will break, and paint will be all in the chamber, plus you have to take the plug out. NO WAY youcan do it in the middle of a game.

I've done it during speedball games. I try to avoid it.......
To clean the PF, just turn the marker over, pull the plug and swab!