setting up my imp

[TinnyJ]

My new Impulse should be here on Friday. It will be coming with a 114Ci /4500 air tank, remote, and verticle regulator. Is there anything I should pay close attention to before shooting? I believe it will be shot before i get it, but you never know.This is my first marker and am a little :paranoid: paranoid.

[Killer Kat]

The first thing I noticed when I got my Imp, was all the friends I got! "Hey Kat, can I shoot your Imp? We're friends! Right?"
But what ever you do, If it ain't broke, Don't fix it! So many guys feel they've gotta take their markers apart and make'em better. And just screw them up instead! Hopefully you got it from FOM! He sets up each marker before it leaves his shop. If not come back here and ask us before ya start twistin this and tweakin that and together we will get your Impy weltin your new friends!:D

[TinnyJ]

Sorry I didn't find this site before I ordered it, and had'nt heard of FOM.:dunce: The main thing I am concerned about is Too much pressure making its' way into the marker. Is there a possibility that the maxflow reg. could be set too high when I get my hands on it? :dizzy: should it be turned down before conecting my air supply (114CI/4500)

[Weasel00]

The first thing to do when you get it. Is turn reg down (turn the cap counter-clockwise). Don't take it all the way off, just turn it down so it is most of the way off. When you get air screw your tank in and watch the gauge just to make sure that it does not exceed 200 PSI. When you tank is screwed all the way in then turn you reg up (turn the cap clockwise) until the gauge reads 180. Then go to a chrono and adjust your dwell so you are shooting 280 fps. Add balls and tear it up.

Jared