BORE SIZE, having frequent busts

[PartsMart]

I've got a Piranha STS G2 with a 16inch all black All American barrel. I cannot find a consistant paint tht works well with this gun

[SubZero4 G2 VTL]

I've found that there is a barrel to gun matching issue for our type of markers. For example, I have 2 buds with Spyder Shutters and Boomsticks. One shoots great with PMI Advantage (no breaks) and the other can only shoot Hellfires (breaks everything else).

I had a Dye Aluminum 12in and it broke everything. I finally switched to the 32Degrees' Terminator and now I don't get any breaks.

What this long explanation is trying to say is that you'll most likely have to try changing barrels if you can't find a good paint match to your All Am barrel. However, I would recommend that you try out different barrels before you settle on one. Easier said than done, but well worth it in the end.

Hope this helps.

[Saiyan_warrior]

Is your all american all black? If so then it works best with medium bore sized paint. What all type of paintballs have you used?

[PartsMart]

I normally use PMI Premium, It's ticking me off though, a friend of mines VTL shoots straighter than my STS . I'm just looking for a change

[PayntMe]

Ive been using a 16 AA on my old vtl and I dont break anything but brass eagle.

[OMEGAX4]

My first game with the gun I was shooting BigBall, this was when they first came out, with the EXTREMELY tight bore non ported barrel. I almost quit after that day. Later i learned that it was tight bore and after recieving my dye i set the stock on fire and tossed it out my widow.

-OMEGAX4

serial number 000119