PDA

View Full Version : Upgrade suggetions for a bushmaster and what I need to know about my bushmaster

SpEctoR
11-13-2001, 11:55 AM
I was wondering what you guys thought were the best upgrades for the bushmaster.

I have a RED Bushmaster 2K, BoomStick, Vigilante Reg, Benchmark dropforward.

I was thinking of the RipperGrip, Ripper High-Rise (the one on my gun doesn't even hold my 12v revy in correctly, too loose, its not my hopper cause i tried my other one in it) CP Flamedrop forward, CP On/Off ASA and thats about it. All that in RED. Just to make it look perdy. Maybe the Vapor Bolt too if it actually does anything.

I know pretty much NOTHING about my gun cause I just got it off EBAY, I don't even know how to adjust the velocity! Any need to know things about the gun itself would be appreciated. Like.. how to adjust the velocity.


Oh yea I have a crossfire 68ci/3000PSI tank, the CP Flamedropforward and CP On/Off ASA will work with that right?
Thanks.
Little Baller
11-25-2001, 05:17 AM
All that stuff wil work but you might want to try a hopper adapter for your feed. It is a little metal thing that goes in the neck of the hopper and it expandes it to make it fit in your feed.
StudBoy
11-26-2001, 03:49 PM
Get the vapor valve! It will probably help you more than the bolt will.
simon woodstock
11-26-2001, 08:53 PM
take off your barrel and look through your gun from the back, if there's massive amounts of light pouring in between the bolt and body like in mine, the vapor bolt will help out a lot. hopefully i get one for christmas, if not i'll buy one for myself the next day.

my best advice is don't cut any corners while upgrading, the worst thing is having to upgrade an upgrade, just makes you feel like you've wasted lots of money. So do research and get the best, if it's too pricy then wait a bit, instead of getting the next best thing.

but the vapor line of upgrades is really good.

however, everything on your list seems pretty good.

you adjust the velocity on the lpr, the thing that sticks out from under your barrel, just stick a quarter or screwdriver in there and turn it clockwise to raise it, and ccw to lower it. if you're not getting the results you want i'd start adjusting the air flow coming from the vigilante (using an alan wrench in the bottom of it). but you should be able to do it through the lpr.