settings

[dawgpound55]

any suggestions on settings for the timmy? like dwell, eye, dwell etc.

im going to use the timmy almost exclusively on semi-auto.

thanks.

[Marauder]

leave the eye on. it defaults to 1ms which is perfect. the dwell depends on which solenoid you have. if the wires that go to it are both black then use 6ms. if one is black and one green then use 16ms and fine tune both from there to get the best consistancy. other than that you should be alright. everything else is pretty much set up right out of the box.

[Omega6_Virus]

bob recommends 6-8ms for all solenoids now. Use the dip switches to keep settings the same all the time.

[Marauder]

hmm that's wierd. i have the older solenoid with the green wire and if i go below 12ms my velocity jumps around 10-15fps per shot. you really need to just play around with it and see what works the best.