How do i loosen up the detents???

[IwAnNaShOoTyOu]

i think they are too stiff and maybe thats what is causing my imp to be braking paint near the barrel

[Hyperballin]

i dought it....... you need an allen wrench that will fit the ball detents and just loosen them.

[AR55 MtM]

What the Hell is wrong with your gun? Everyday you say something bad is happening to it.
The guy above me is right you can loosen them with an allen wrench but why would yo want to if you loosen them you will chop even more.

[Hyperballin]

i think his dwell could be to high. Go read your manual, look in the back where it says trouble shooting, read that and check everything it says to, after that read your entire manual.

[IwAnNaShOoTyOu]

the dwell is at zero i havent messed with it...im gonna set it to like 7 before i go pbing tomorow

[Hyperballin]

no way dude!, go to the chrony tomorrow set your imp at 160 psi and set your dwell to 8, you should only get like 200 fps or somethin low, than start going up and shooting and see what the chrony reads, at about 11 you should have about 260 fps, or if you dont have a chrony and your back yard ballin, than set your dwell to 11 and your psi to about 160-170. Dwell at 7 will get the balls going no where. And your first couple of shots your gonna have fsdo, first shot drop off, and than you should start shooting fine

[IwAnNaShOoTyOu]

thanx alot hyperballin, ill do that and see how it is, the other day i had like 280ftps and the dwell was at zero and the pressure was at like 140... so maybe thats y i was chopping

[Hyperballin]

the dwell doesnt come at zero if thats what your thinking??? its impossible to shoot with the dwell at zero, i dont know what number its at the dwell operates from 4-14, to find out to get your dwell at zero you have to hold the dwell down button until you hear a tripple beap sound and thats how you know your at zero, i told you how to do it in your other post

[IwAnNaShOoTyOu]

i knew how to adjust it before u posted on my other post, but anyways i set it at 10 with pressure 140...tommorow ill chrono an just adjust the pressure

[Hyperballin]

SOUNDS GOOD just make sure you dont go over 200 psi, it will blow your solenoid

[exhale]

Originally posted by Hyperballin
SOUNDS GOOD just make sure you dont go over 200 psi, it will blow your solenoid

Or come out of your PRV.

[toothpastedog]

pressure release valve

just my 1/2 cents