wuts up wit this

[ishoottheimp2]

i just gotta 68/3000 tank and i screw it into my impulse and the air doesnt go into the gun or somteihng it just all leaks out the max flow and **** it doesnt screw allt he way in but im just tryin to figure out wuts up wit that? if u know jus tell me

[AR55 MtM]

Did you pull the bolt back?

[SuperBeaner]

We need a little more information about your marker, reg type, etc.

[ishoottheimp2]

its a stock impulse with horizontal max flow...... the bolt is back when i screw the tank in...do i need something special for it cuz i did with my co2 tank so can u tell me wuts up or wut

[gusdog849]

I had a problem like that with an old maxflow of mine and when I put an on/off on it the problem stopped. Also you could try the double oring trick by putting another oring in the ASA of your maxflow.

[ishoottheimp2]

u put an on/off on a nitro????? and wut u mean the double oring on the asa?

[ishoottheimp2]

Originally posted by ishoottheimp2
u put an on/off on a nitro????? and wut u mean the double oring on the asa?

[AR55 MtM]

DO not double post, it is not cool for your spammage, your thread was at the very top there is no need to post the same thing once again.

[race free flow]

PMed you. You NEED an o-ring in the maxy before you crew i the tank. I don know what the hell these other people are talking about. THey obviously don't know. Your welcome in advance.

[gusdog849]

Originally posted by race free flow
PMed you. You NEED an o-ring in the maxy before you crew i the tank. I don know what the hell these other people are talking about. THey obviously don't know. Your welcome in advance.

No you do not NEED an o-ring in the maxflow. I'm running a horizontal maxflow on my imp right now and I've NEVER had an o-ring in there and NEVER had a problem with leakage. On some of them if might be necessary to put an o-ring in there before you screw in your tank, while others it does not.

[race free flow]

well let's set here. This thread is about his gun and his problem. I didn't say everybody needs to put an o-ring in the maxy i said "YOU" pertaining to the kid. And by looking at his problem he does NEED and o-ring to fix it unless he wanted to spend extra and get an on off which is a waste. THink before you respond please...thank you.

[gusdog849]

ummm i did think obviously because you just said exactly the same thing i did. i said that on one i used to have an on/off solved the problem. Did i say go buy one? No. So don't tell him the exact same thing i did and then say that I don't know what im doing.The way you said it made it sound like every maxflow needs it so im sorry that i misunderstood your explanation.

[sweathogs]

This problem has been asked many times before.
Same thing happened to me. I tried the o-ring trick, which did not work for me. I even tried all kinds of o-rings.

My problem was fixed after getting an SP on/off. No leaking.

I am using a Crossfire 68/45 connecting to a RAT Jr.

[SPPaintball]

im tired so i dont know if im really comprehending this right, but if ur psi is too high, the air will leak out the max flo.

[ishoottheimp2]

thanx guys iunno wuts up wit it its wierd people say the burst disk is broken but my co2 works so y doesnt the 68/3000 and that the max is low pressure and the tank isnt or something like that im not sure i needa figure it out though

[toothpastedog]

you have a cool sig ishoottheimp2, i give you my kuttos (don't get any ideas about what my kuttos are though... )

:rolleyes: :P

[toothpastedog]

btw, now i see where you were coming from, gusdog849, when you pm'd me. you are a very nice guy though so don't worry about anything-not that it seemed like you were. you are in the prime of your life now (haha, i can't believe i just said that to you) and you should be doing two things:
1) Pimp'n da b!zatches
2) Get'n bum drunk every other day

;):rolleyes:

[Awhislyle]

make sure all the orings in your reg are in good condition

[master_chadwick]

Originally posted by toothpastedog
you have a cool sig ishoottheimp2, i give you my kuttos (don't get any ideas about what my kuttos are though... )

:rolleyes: :P

you mean kudos right? :D

[Awhislyle]

Tpd doesnt have to worry abour speeling worfds write

[toothpastedog]

Originally posted by Awhislyle
Tpd doesnt have to worry abour speeling worfds write

haha :crazy: , yeh, i guess i meant kudos-i don't spell well at 11:00pm