is this part nessacary

[Kissane720]

ok i was taking apart my 04 bko and i was unscrewing the part shown in the picture i dont know the name and the middle part there was a little ball above the spring i seem to have lost it will this cause problems and if so where can i get a new one ...thanxs

[Kissane720]

forgot to post the pic

[lotus_esprit5]

The pic is not working for me. Anyway, I am guessing that you are referring to the ball bearing in your inline reg. Yes, you need that part. I'm not really sure where you can get a new one. Email ICD and ask them what size it is. You might be able to find one at a hardware store that will work, as long as it is the correct size. Don't air up your gun until you get that part replaced.

[Kissane720]

ya thanxs is was what u were talking abt i called up icd and there sending me the part for free what nice guys

[RainTreeBoy]

lotus was right, just so you know, that part in the pic is your HPR.

[xXniTemAreXx]

without the hpr, youre solinoid goes kaboom!!! (unless you have an adjjustable tank).

[lotus_esprit5]

Thank you for that keen observation :laugh: .

[xXniTemAreXx]

;) anytime.

[artshark]

Will it even go ker-splat if you have a low pressure preset? Actually, it will, preset low pressure tanks are 400, and the op pressure is ~250.....



Art

[Kowz_76]

He said adjustable, not LP preset.

[lotus_esprit5]

ok art, bottom line is you dont want to run air through a broken regulator that has missing pieces. It probly leak, not regulate, possible blow a seal, and overpressurize your gun, and then blow more seals and break and then the solenoid would explode and you'd be out of $65.

Now if he had a gas-thru grip, and an adjustable tank, then it would be ok.

[artshark]

Oh yeah, he's missing a part of his HPR. Me forgot. :|



Art