Anotehr Leack Problem!

[paintballking]

ok well i was lubing up my gun... and then it started to leack( after i put it back to gether) it sounds like its coming from the boltbe hind it or some thing .... i dont now how.. but that were it sounds like its coming from, any ideas?

-KiNg

[cockerboy111]

I'm not a real big expert...but I have read that if you lube the bolt up too much then it can leak...someone can correct me on that but maybe thats what it is....

[paintballking]

i have and NDZ equalizer bolt its delrin dosnt need lube.. so dont now if that is it thanks though!

-KiNg

[cockerboy111]

O-rings?

[paintballking]

every sing oring is lubed.... i think...

[rhchilipepper4]

PM toothpastedog.

[paintballking]

DUDE i got an idea ill PM toothpastedog heheh JKJK

DUDE thanks greeat idea only u could think of this idea hehe thanks much!

[master_chadwick]

you might want to wipe off the grease on your orings and check them thoroughly. There may be a one pesky ring that has some sort of imperfection on it(maybe a den't or scratch). those can create slight leaks. just a suggestion. i would probley check your bolt first. i remeber i put my hammer assembly in once and apperently i had rubbed an oring to hard against the threads and roughed up a ring.

[toothpastedog]

i pm'd him. i suggest taking out the valve, lubing the o-rings and popping it back in. do this, master_chadwick did a good job, for once ;)

If you just want to clean the valve:
1. disconnect air sorce and remove paintballs
2. remove bolt pin, bolt, and take out your hammer assembly
3. Unscrew your front cap and remove your valve spring
4. take a straight shot squeege and put it through the back of the gun where the Hammer assembly was to the valve this should push out the delrin valve (it will be a little peice of delrin with an o-ring on it)
5. take the delrin valve and wipe it off with a towel and regrease the o-ring. then simply reassemble

as for taking the whole valve out (incase you get a rip valve) instructions are here

EDIT- the instuctions i gave were for the stock valve and since this thread is named "NDZ impy maintenance" or something to that effect, i assume you would have a RIP valve, BTW they are maintenance free, but for whatever reason you may need to take it out the instructions to do so are in the link i've provided

[master_chadwick]

man that ram thing was a fluke.....:|

[toothpastedog]

could be what you said, but if it is leaking out the barrel, it is almost always going to be valve related... almost always are the key words though, so you could be right...

[master_chadwick]

i love it when i answer problems like this in other posts

[toothpastedog]

lol, you've done that before haven't you....:P

[master_chadwick]

seems to be my virus:eyes:
(man we are like a spam tag team)

[toothpastedog]

haha, true to dat:P

[paintballking]

id say u guys spam every thread i look at! U two are always joking about some thing or another but, hey it keeps me amused! and thanks toothpastedog i think it is the valve but im ordering the RIP valve so i just hope it works and makes the problem stop! master_chadwick and thank u as well. u to are like a spam tag team and a help full informationol tag team AT the same time! heheheh thanks agin!

-KiNg

[toothpastedog]

just remember to put a lot of grease on the rip valve's o-rings (they're on the outside) and then install the valve from the back of the gun. yeh, we do work well together don't we master? :P :cool:

[master_chadwick]

Oh but of course, we're like cheech and chong, peaches and herb, ike and tina, hawk and animal, billy and jimmy lee, chips and dip, steak and potatoes, lamb and tunafish.....maybe you prefer spaghetti and meatboollll

always glad to hlep:D

[toothpastedog]

i don't know about the cheach and chong thing, i mean, we haven't even hit da bong...





...that's just how cool i am, i wasn't even trying to rhyme and it just came out sooo smooth :confused: :crazy: :blah: