Pimp Kit on Co2

[1 Evil Package]

OKay...my cousin is gunna get a pimp kit in dec. as a XMAS/BDAY present from his parents. But the only problem that hes gunna run into is that he cant get a hpa tank to go with it. But he wants to knoe if he should get a anti-syphon co2 tank? And how will that run on a pimp. And later on when he gets a pimp what should he do for the hpa to work? Does he have to change the o-rings or on due to the anti syphon

[toothpastedog]

he should buy/have installed an anti-syphon kit on his co2 tank, and he should also buy an impulse seal kit from sp. when he eventually gets hpa, as long as he doesn't switch from co2 to hpa in the same day, he shouldn't need to do anything.

[SPPaintball]

CO2 will only safely work on an imp if the tank has a properly installed anti-syphon. He might also want an on off valve, though it is not needed, it would help some gassing/degassing problems. CO2 runs fine on imps. Not as well as HPA because of shootdown and consistancy, but its fine to use.

When he gets HPA, he will need to not use his imp for a day or two, so he doesnt warp the o rings. If he switches from co2 to hpa the same day, his o rings will be warped, so just when switching, from co2 to hpa, tell him to make sure the imp has a day or 2 for the o rings to settle down before using hpa.

[toothpastedog]

nice work ;)

[SPPaintball]

Originally posted by toothpastedog
nice work ;) You too :)

[toothpastedog]

:) we da team co2 anti-syphon...

[SPPaintball]

team co2 anti-syphon :eyes: :laugh:

**SPPaintball buys a custom made sticker reading "team co2 anti-syphon"**

























just kidding lol

[1 Evil Package]

okay...he has a 16oz co2 tank by pure energy. At my local pb store will i have to purchase a new tank or tell them if they can add a anti syphon? and will the impulse seal kit fit his Evil Pimp Kit?

[toothpastedog]

it should. call evil to fine out for sure: www.evil-paintball.com

[SPPaintball]

Originally posted by 1 Evil Package
okay...he has a 16oz co2 tank by pure energy. At my local pb store will i have to purchase a new tank or tell them if they can add a anti syphon? and will the impulse seal kit fit his Evil Pimp Kit?

1. They can install an anti syphon on his current tank if he wants them to.

2. Yes it should

[toothpastedog]

ha, beat you... team mate... :P

[SPPaintball]

Originally posted by toothpastedog
ha, beat you... team mate... :P but you never answered the first question :P

[toothpastedog]

well.... welll.....


i can't think of anything in my defense in this pointless argument that isn't all that serious.... except...


i posted before you..... :rolleyes:

[SPPaintball]

Originally posted by toothpastedog
well.... welll.....


i can't think of anything in my defense in this pointless argument that isn't all that serious.... except...


i posted before you..... :rolleyes: :laugh:

[ikey]

you might run into one problem. one reason that the impulse can run on co2 so well is because the max flo just happenes to work well with co2. some regs were designed this way like the palmer stabilizer, and sometimes ppl find out by coincidence, like hte maxflo. the pimp does not have a max flo, it has a detonator reg. i do not have very much experience, so i do not know if the detonator is good with co2. do some research. i however used to use co2 on my impy. after useing HPa there is a world of difference. with a gun as fast as an impy or pimp, there will be SIGNIFIGANT shootdown, aka your velocity will drop drastically depending on how fast you shoot. and you are dependant on the weather. in the cold, co2 doesn not give as much pressure. one day i was playing in the cold and the tank could barely provide a fast flow of gas. i ripped a fast sting of shots and my pressure on my gun got so low that the last few shots only went about 15 feet. the gun will also not be as acurate because your velocity will not be as consistant. co2 is also very dirty, and the matience will quadruple. seals will also go bad faster, cuase potential problems. my advice is that your cousin should get his priorities in order. before he gets a gun as cherry as the pimp, he should get nitro, and a fast laoder, good gogles, etc.

[1 Evil Package]

Well...hey has a timmy on angel air...and he doesnt plan on selling it...so he might just run with it on co2 for a month or so...plus he has like 2 revys, 1 evo, and 2 empire reloaders.

[RatJ313]

seriously, i wouldnt touch evil parts considering all the bad ive heard about them. i say new designz, very good quality and many people use the parts. as for evil, very few people that use them actually have good expieriences. im not saying that he has to get a different brand, im just saying he should do some research and go to impulse owners group and ask all of those guys, im a frequent flyer to those froums and not many seem to like evil parts, why? ask them. i just know that i have seen new designz parts on impulses and they work wonders with efficientcy and FSDO.

[1 Evil Package]

actually the evil pimp is pretty good i test shot it at my local pb shop...its pretty rad...fast and accurate. Wish it was lighter

[Hyperballin]

With all the money he gets for christmas from his relatieves he should have enough money to get hpa. Dude i would seriously not run such an expensive gun on some crappy co2 tank. Get a 67 dollar aluminum aci bulldog tank from paintballgear.com

[1 Evil Package]

yah...true if not...im more than likely loan him like 200 bucks and then ill ask his rents for money so i get it all back.

[Hyperballin]

If he does have 60 dollars left over. I think he really should get the aci bulldog tank.. Its at shop4paintball not pbgear.. My mistake.. Man you are loaning him 200 bucks!

What a true cousin!:D

[toothpastedog]

"co2 is also very dirty" i hope you don't mean litterally dirty...:P