Oil?

[Rockster]

Hello, I have a BE Avenger with a 32 degrees terminator barrel. I was wondering what oil I should use for my gun, how often I should oil, and how to apply it? Thanks for any replies and info.

[Silent Knight]

it's quite simple really.

you dont want to drown your gun in oil but what you can do it take out the bolt and check the o-rings on the bolt, make sure they are ok, and lubed up. If not, then you could put one drop on there and lube up the bolt with your finger.

now put oil into your bottom line adapter, unscrew your barrel, attach your air source (co2 or HPA), now dry fire the gun maybe 30 shots or so, this will cycle the oil through your gun, and lube up the internals.

you should do this after a day of paintball.

You dont have to take out the bolt like i suggest, this is just to check the o ring condition.

[quejerpwacky]

try chainsaw oil, its really thick, provides a good seal, great for long term starage (ie winter) too.

[Candlewick]

No, just use Automatic Transmission Fluid. Wont hurt your seals, and is dirt cheap.