Big Problem

[Shine]

Well last weekend I set my reg to 180psi but when I regased it, it went to 205-210psi and now my solinoid is leaking agian. This has happend to me twice and the first time I got it fixed at World Cup. Is it something I am doing wrong? Oh I am also using co2 with antisyphon and on/off and I live in Florida if that means anything.

[Weasel00]

The reason may be that when you are gassing it up that you are getting some liquig CO2 in the max flow. Before you gas it up everytime you might want to turn the reg down and then screw in your tank, then readjust to 180 psi. You may also need to clean you reg.

Jared

[Shine]

Well thanks I will try that but dont I need a new Solinoid? and if so can I just get a free one from smartparts?

[Weasel00]

You probably don't need a new solenoid. Take the solenoid off and make sure that the gasket is clean and free of debri. Also check the gun where the solenoid mounts. Then put the solenoid back on making sure it is snug. Then try regassing you impulse.

Jared

[Shine]

If I were to get a N2 system would this eliminte my psi problem?

[Weasel00]

You shouldn't really have to much of an problem. I don't gennerally have a problem when I run CO2. Make sure you point your gun up when you screw your tank in. That might help.

Jared