Low Pressure?

[War_Wizard_73]

I just bought a used Impulse. It has a low pressure mod on it. What pressure should I run my gun at? Do I adjust my pressure on my reg. or the low pressure thingamagigy?

[Weasel00]

Is there a gauge on the back of the gun to check the LP coming from the LPR?

Turn your LPR down so it is almost all the way out. Turn you Max Flow so it is almost all the way out. Turn you Max Flow up to about 200 PSI. If there is a gauge on the back make sure that the gauge is still reading 0 and not creeping up. Then turn your LPR up to about 100 psi. Set your dwell and make sure that everything runs alright at 280 fps.

Jared