'99 Angel LED

[pr0kch0p]

Can anyone fill me in with some info on '99 Angel LED's?

I would i hook up an intellifeed to a new revvy? what kind of charger do i need? if i have a problem with it, who should i talk/send it to?

Also, the most important: does it accept angel LCD parts, if so which ones?

I was thinking of purchasing a used one, here is what it comes with:
-99 blue Angel SE LED
-zip chip
-some bolt
-stock bolt
-blue KAPP high rise
-silver KAPP low rise
-blue KAPP breach knob
-blue KAPP volumizer
-WDP lighting trigger
-stock WDP LCD trigger
-SS hammer (installed)
-stock brass hammer
-Hogue grips
-DYE stickies
-Intellifeed
-black KAPP DZ2

pic is attached

thanks

[VeNoM]

thats nice prok. sorry i dont know the answers to your questions so im just wastin space, hehe. but thats hella sweet. it looks like it would take LCD parts and like it was well cared for.

[wolverine]

Can anyone fill me in with some info on '99 Angel LED's? Yes I can :D

I would i hook up an intellifeed to a new revvy? The LED Intellifeed kit consists of just the wire that plugs into the LED's charger/Intellifeed port on the back of the marker. You solder the revy ends of the intellifeed wire to the motor in the revy. With this setup you CAN NOT use batteries and Intellifeed at the same time. For this option go to www.g3pb.com and look in the Projects Angels section for a mod that requires you to add a .50 cent diod to the mix. I did it and it works great!!

what kind of charger do i need? The LED charger is different from the LCD charger. Side note, the 2K LCD charger is different from the 2K1 and 2K2. IF the marker does not come with one (which it should) you will need to buy one. Check with www.animalpaintball.com www.buypb.com or www.angelparts.com they should carry them.

if i have a problem with it, who should i talk/send it to? Any of the above three mentioned web sites have Angel techs. But service will cost you since LED's are no longer under warranty.

Also, the most important: does it accept angel LCD parts, if so which ones? The list is shorter if I say which once it does not take.
The following are different:
~ Charger
~ Bolts
~ Several internal parts including the board, 14-way and wiring harnes.
~ The LPR/Valve on the LED is different on the LCD but the upgraded LCD LPR/Value can be installed in an LED.

BTW, That gun looks good!!!