custom drop forwards

[Creek]

C:\My Documents\drop forward3.jpg

these are just a few that we have made

[Killer Kat]

Sweet Creek, Man they look really cool! What are they made out of? And are they colored?

[Creek]

Made out of 6061 aircraft Alum. The pic don't do it justice cause my cam sucks. My good cam is in my truck and didn't walk out and get it. They can be almost any color if they make the dye.
Also my flames etc. These are 6" drops. Started to make 4" ones this week.

[TheSickness]

what do you use a cnc bridgeport to make them? or a edm machine? i want to make my own drp forward but im not sure wich machine i should use in shop

[Creek]

I use a non cnc mach. I using a delta with a spin table. Also A band saw on some of them. And mill out the rest.

[TheSickness]

sweet. they come out nice. i thought you would use a cnc on that.

[Creek]

I have on another set that is in my Friends store right now. Those had alot of curves etc. And inside bores.

[DonkeyKev]

Man your drop forwards are TIGHT!!! Would you consider selling me one?????? e-mail me at donkey_kev@hotmail.com:D

[Paint Bulley]

I own a spyder, and I don't want to buy a adapter or a new grip frame, or oneof the kingman drops.

Could you make one of those with off set holes?

[Creek]

I have flames and lighting bolts that are wide eough to fit syders. Reason is I get alot of guys wanting that way.

[Paint Bulley]

Originally posted by Creek
I have flames and lighting bolts that are wide eough to fit syders. Reason is I get alot of guys wanting that way.

What? I was asking about a drop forward.

if you ment to say df. then do you mean the holes are straight but so big the off set screws will be able to go through the hole or what?? I'm a little confused ou your response

[Creek]

I have some with of set holes is what I was trying to say.

[Paint Bulley]

ok thanks,

Can you get some more pic.'s ?

I just want something simple (no lightning or anything) but a little cooler than that top one you posted.

If somoebody told you how far forward, and how far down, can you pick one from that info?

Thanks a lot,
Paint Bulley

[Creek]

yeahi can do that, Out of my friends paintball store I get request to do drops to there specs. I going to be taking a Few more pic's tonite I think. The last batch where kinda small

[Paint Bulley]

could you do this? hole all the way down the side, and then where the ASA screws in longer than normal soit screws in in the back and the hose goes up through the hole?

[ColdFusion]

I have one of his drop forwards on my gun and it is great

[Ebonclaw]

How much you asking for one of those things? I see the CP Lightning one for $35. I'd like a lighting one that I can put my Shutter's reg on. I have an e-frame so I don't need staggered holes, but I do need a way of mounting the ASA, unless the Shutter's reg mounts like any other reg. I don't know if they did anything screwy with it like they did with the grip holes. What I'm trying to say is:

Chrome Lightning DF
Standard holes (aw heck, drill two sets, one staggered and one standard. Up the resale value.)
And the bottom needs to mount to Shutter's ASA......(again can you do two sts of holes if the Shutter's ASA/Reg are screwy? That way if I get a new reg I can keep using your drop.)

How much we talking? Do you want sexual favors? :laugh:

[Creek]

naw I am married so my sex life is taken care:D Price wise where talking 25

[Creek]

paintbully what size hose we talking here,and what type of hose.

[Paint Bulley]

I was hoping Stainless Steal Hose

[Creek]

I can do this, this be cut out of stock,I don't bend them. So tell me if its a 4 or a 6 and if you want a 2 or 3 inch drop down on it. Meaning like this 6" long drop of 2" so let me know

[Paint Bulley]

Originally posted by Creek
So tell me if its a 4 or a 6

*never said I was the smartest so -
I don't understand that part? what a 4 or 6?

Thanks,

[Creek]

check your PM messages I explain it in there

[Creek]

Bully I made one of them up last night be posting a pic of it for you later today

[Killer Kat]

Originally posted by Creek
naw I am married so my sex life is taken care:D Price wise where talking 25
Creek Your married and your wife charges ya 25 bucks. Bro I'm sorry , No wonder you're sellin so many dfs, you horny old guy! j/k :laugh:
Seriously I've seen guys charge alot more than that! 25 bucks is a great deal for such craftsmanship!

[Creek]

:D yeah but you see what I charge her for a roof over he head :laugh:

[rios_creos]

hey creek, those look sweet, how much would it cost for...lets say a 5 inch forward and a 2 or 2 1/2 inch drop.

how much for the fire/lightning

how much for the plain one


thanks, i may be interested, do you ship them, if so how would i pay.

thanks alot

[Creek]

I'll pm you the prices and yes I do ship them

[rios_creos]

oh crap, dude i'm really sorry but i just ordered a mask and oil and paint and a drop forward (lazy z drop forward)

but my mom told me to buy everything at once and i completely forgot i had posted in this thread for you to hook me up. damn.

oh but my friend has a shutter and it has inline holes that screw in sideways. i don't know how to explain it but here goes


normal l 0 l his l l
l l l l
l l l 0 0 l
l l l l
l l l l
l 0 l l l
llllllllll llllllllllllll

as you can see his aren't inline or offset, kingman has screwed up yet again by creating an entirely new design.

however he is intent on keeping the regulator. so he needs one that has his design on the tank part, and offset on the grip frame part

i know this will be a biotch to make probably but he also wants a lightning or fire design, just pm me about the price and if it will work or anything

and again sorry i couldn't order from you. your drops look cool.;)

[rios_creos]

dammit, i had drawn out his design compared to the inline design using 0's and l's. but it doesn't post right i guess. let me put it this way. in the inline design, the holds are vertical, on his design, they are horizontal.


so normally they go from the back of your handle, to the front of it. or vice versa.

his go from the left to the right, or right to left.

i know i'll have to give you measurements later on so pm me.

thanks:)

[Creek]

it cool you didn't order your drop from me:) about your friends I have done that set up on my friends marker its not all that hard just a adaptor plate is all I have to make.

[Paint Bulley]

Creek ! you never got more pics :(

ok, can you make one, and put an asa, on it for me (like weld it on?) would that be possible?

cuz' Christmas is over and I got the dinero

[SpYdEr_RyDeR]

I would really be interested in looking at all the different designs you have made, I might buy some gifts for my team if you know what I mean.

[davkad]

can you make any adjustables creek?

if you could make me a relatively well priced adjustable dropforward... we probly ahve a deal, i will private message you more info.

[pbgod68cal]

can u make them fit a dovtail system like a max flo or armagedon or some thing like that and if i drew up design wich is sorta like the plain one just with holes could u do it

[SpYdEr_RyDeR]

yeah, why stop at D/F, why not make things like sight rails and triggers and what not. You could seriously make some cool ****.

[Ebonclaw]

Could you do a fire/ice on a Lightning drop except make the fire blue?
It's very tempting.....

[MuckRaker]

Nice work Creek ... what other designs do you have?

[Paint Bulley]

I think his family is a little more important than his business right now.

I think thats why it has taken time for him to get back to you all.

[ihatespyders]

Nah hes probably bangin j/k
hey you know what i think would be really cool that i always wanted the gun would probably be unbalanced though I have a 20oz and if you would be able to make me one as long as the tank that would rock thanks pm me or something

[Paint Bulley]

http://www.geocities.com/dariel4g67/DropForwards.html?1003360205904

See the DF at the very bottom the System X one... Could you make one "like" that?

[amz370]

hey u guys thinking of making my own drop next time i visit my grand-pa (he's a machinist or used to be hes got a basment filled with ¢rap that i can make it with, he'd love to doit, so aluminum that's what i got to use, ok

[Team Velocity]

hey creek. Do u think you could make anything like a kaap drop zone 2? Let me know. Thanks.

[SpYdEr_RyDeR]

Where is creek??? he hasnt replied to anything, whats going on?

[Creek]

Ok guys I am back, my wife is home and doing pretty good on her own now. I am going to be posting some new drops I have made after I anno them etc. I have a new ajustable drop but hate to post it till i have a few made up.
I am working on a kapp one now but its a little bit diffrent. again guys sorry I have not gotten back to you but my wife came frist these days. and the other mods where kind eough to watch over my forums while i was away.

[SpYdEr_RyDeR]

I'm glad to hear that she is alright.

Do you think you could make other things, like triggers and what not???

[Creek]

I making a stainless shear for a piranha g-2 and trigger right now.

[SpYdEr_RyDeR]

Could you make triggers like the wgp hinge trigger for a spyder? I'm talking about the flat one.

[Creek]

only one way to find out and that is for me to try

[SpYdEr_RyDeR]

well give me a price quote before you make one, I dont want you to waste any material, do you have the measurements for the spyder? I just thought of something very cool, I had to do like 20 minutes of work to get rid of my front slop and my back, so I figured you could make it to where it basicly has a both front and back trigger stops. unless you are going to make one for someone else, hold on to that thought until I get further plans for this, because I'm realy on to somethin here!

[SpYdEr_RyDeR]

Ok, I kinda have a paint shop picture of what I'm talking about:

[Creek]

ok if you get a plan or something drawn it up and I'll see if I can fake it I mean make it ;)

[snipe98flat]

They look good how much for a black one.:dunce:

[Creek]

the black one is 15 bucks with out adaptors for spyders adaptors are 5 bucks.

spyder ryder i think i can make that. i'll give it a try in a few days

[ihatespyders]

Im pretty interested i got a spyder. id like it if i didnt drop down much more forward if that makes sense

[VertigoTech]

Can u make double trigs for the tippmans? I ordered a double trig kit for it, once i get it, Ill mesure it and Ill draw up some plans in AutoCAD.

[.gigante.]

ok, here's a pic of my idea. just simple black. i have it on autoCAD. down 2 1/4, forward 4 1/2 or 5"

its for a spyder

[Creek]

you want the box ended on it like that

[Creek]

Originally posted by VertigoTech
Can u make double trigs for the tippmans? I ordered a double trig kit for it, once i get it, Ill mesure it and Ill draw up some plans in AutoCAD.


I pretty sure I can make it.

[Creek]

Originally posted by ihatespyders
Im pretty interested i got a spyder. id like it if i didnt drop down much more forward if that makes sense


I can make the drop any way people want them

[VertigoTech]

sweet, Ill start working on it when I get the kit on tuesday, thanks to CountyPaintball, (damn i feel like a audio billboard...)

[.gigante.]

you want the box ended on it like that
i guessing this is to me, but i dont quite understand what you mean. possibly on the end where it attaches to ths asa?

[Creek]

Originally posted by .gigante.
ok, here's a pic of my idea. just simple black. i have it on autoCAD. down 2 1/4, forward 4 1/2 or 5"

its for a spyder

I can do that but what marker or frame is that. need to know which screw pattern it has . Inline or offset

[.gigante.]

stock spyder frame with the offset hole pattern. how much are we talking here?

[Creek]

About 10 bucks

[.gigante.]

post or send me a pm about shipping and about how long it will take. also do you want money order, paypal etc
thanks