Rumors about the T.E.S.?

[freehand]

i've heared stories about the T.E.S. crapping out on people after a month or so?
is this true?

[ImprezaWRC]

imo, yes ive seen it happen plenty of times

[wicked_one_26]

u better invest in o-rings and teflon tape

[ImprezaWRC]

or better yet invest in a better gun that you can rely on

[freehand]

so what exactly hapens to the t.e.s.

?

nothing goes wrong with the electronics?
i hope
just some need for somwe teflon tape

[schoolsukz08]

Originally posted by freehand
so what exactly hapens to the t.e.s.

?

nothing goes wrong with the electronics?
i hope
just some need for somwe teflon tape

Nothing goes on with the electronic's. Don't listen to WRC. Read the stickies. Blah blah blah.

[ImprezaWRC]

most of the draguns ive seen have crapped out becasue of the electronics

[Born_to_Race]

Originally posted by wicked_one_26
u better invest in o-rings and teflon tape

You would need o-rings and teflon tape for any gun. How often you replace them is different though.

[TESballer]

the electronics will not just go bad, as for the tes and its electronics the only thing bad about it is that you can't use el cheapo batteries on it or its mess up when your firing fast, the eye is a completely different story, stories about tes going dead after awhile is because people don't take care of their gun properly

[SpyderMan279]

Originally posted by Born_to_Race


You would need o-rings and teflon tape for any gun. How often you replace them is different though. Don't listen to anyhting this guy says, he's on this m3/dragun forum all day just to bag on draguns.

[SpyderMan279]

Originally posted by SpyderMan279
Don't listen to anyhting this guy says, he's on this m3/dragun forum all day just to bag on draguns. OOOOPPPPPSSSS sorry, I meant this about WRC.....

[wicked_one_26]

Originally posted by Born_to_Race


You would need o-rings and teflon tape for any gun. How often you replace them is different though.


I have had to a couple of times. Then I realized the green dragun o-rings were junk.

I dont have to use telfon tape on my backup gun....... Oh wait, I never have to use it.........:D

[rottensquad07]

trust me, all companies will have a few defectives.....but in most cases, the problems are user error, or lack of maintanence. This is true of any marker. The reason that it looks like there are so many problems, is so few people post when the gun works flawlesly.....only the problems are posted. I have had 4 Draguns, my friends have some....I would say 7 guns between us, and none of them have crapped out because of defects. See my sig for my current markers!

[freehand]

what should i replace the green ones with?

[teswkit]

DUDE...the TES has a problem with the SEAR...not the WIRING u FREAKING IDIOT WRC....bet u dont even play paintball....hahahhaha....bet ur a noob...I had a the TES...it had a sear problem...I fixed that by stretching out the sear spring...then later i Upgraded to the One Kit...so WRC...U SUK!!!!!!

[SpyderMan279]

Originally posted by teswkit
DUDE...the TES has a problem with the SEAR...not the WIRING u FREAKING IDIOT WRC....bet u dont even play paintball....hahahhaha....bet ur a noob...I had a the TES...it had a sear problem...I fixed that by stretching out the sear spring...then later i Upgraded to the One Kit...so WRC...U SUK!!!!!! HEHEHEHEHE......sooo true........

[ImprezaWRC]

ohh the irony

[p8nter24]

other than the occasional leak, my tes shoots realy nice. What type of o rings do you use to replace the green ones, the white co2 bottle ones or the black (internal) orings.

[wakeupandbord]

Just invest on something like a ICD B2K4 w/PDS if you want a good gun and dont want to spend too much

[schoolsukz08]

Originally posted by wakeupandbord
what doesnt go wrong, just invest on something like a ICD B2K4 w/PDS if you want a good gun and dont want to spend too much

Dude, don't bring back threads just to try and argue. Give helpful or thread contributive information, like you say "what doesnt go wrong" why don't you say what goes wrong, instead of implying that the gun doesn't work at all.

[wakeupandbord]

half of the time my gun doesnt work at all, and stop worring about how i phrase things and more about whatever the hell people worry about these days.

[z0n3d0u7]

prolly because most the time you dont know what the hell your doing.

TES's are GREAT, IF you have common knowledge of Stacked blowback marker's operation.

ALL the problem's in the standard TES can be fixed by using good battery's, Grinding the Sear plunger, and putting teflon under the front 0-ring on the front block.

[wakeupandbord]

Sorry if i was being mean to u,
But im not a retard and have lots of common sense about draguns and any other paintball guns because I have been playing for almost 6 years and have had 2 draguns.

[z0n3d0u7]

So explain why you still "Hate" your TES. My guess is because it's still got problem's you dont know how to fix. Am i right?

::Drumroll::

[C-RaD]

Yes, i my self own a tes. and i had it for about a week. i wanted to go paint balling so my friends and i went. every time you tired to shoot the gun would not stay coked. that was one of my problems also it came with a crappy value and was leaking air like a mother. and one other problem i had was you need to change the the reg to change the drop forward and get and cp on/off. just because the regulator fittings doesn't fit macro line

[p8nter24]

they did great thing and wierd stupid things.