BKO. Good?

[Ballin'King]

Hey
I'm gonna get this 04 BKO (http://www.pbnation.com/showthread.php?s=&threadid=624383&highlight=%2BBKO) for $240 shipped. It has a powerstation reg, vapor bolt, clamping feed neck, and a psycho ballistics drop Is it a good choice/deal? Here's so pictures.

and i posed this in the ICD section and got no replies so....

[Ballin'King]

other side

[Flakey Lemon]

Go for it! Make sure the 'noid and everything is in working order.

And I would do a search on his posts to see if he has had problems with it.

Edit: Look at this: http://www.pbnation.com/showthread.php?s=&threadid=621945

[nahthan]

Its not bad... I would get it if I were looking for a semi in the $225-$300 range. :) Well, that or a 'mag.

[snap shoot]

Originally posted by nahthan
Well, that or a 'mag.

[winston13579]

Originally posted by nahthan
Its not bad... I would get it if I were looking for a semi in the $225-$300 range. :) Well, that or a 'mag.

[Sniper15]

Originally posted by Flakey Lemon
Go for it! Make sure the 'noid and everything is in working order.

And I would do a search on his posts to see if he has had problems with it.

Edit: Look at this: http://www.pbnation.com/showthread.php?s=&threadid=621945 Hmm, interesting. He posted about this leaking problem only two days before the put the gun up for sale...

If I were you, I would PM him and make sure he's got it fixed and working before you buy it. But if it's working then yes, I would say that it's a good buy. I'm starting to save for an 04 BKO myself.

[spyder_king06]

yea man definatly make sure everything is in working order b4 you buy it.
And dude your from Canada so expect customs to tax the s*** outa of it. Its probably gunna cost a huge amount going through customs.

[Ballin'King]

Im talking to him on MSN and he said the lpr only leaked when you turned it in to to far, and said it was a safty feature so you couldn't shhot like 320 fps. And the only other thing was the noid leaked a few times and all it needed was the be tightened.

[DirtMcgirt]

good deal:tup:

[Danman69]

sounds like it has had some problems, I wouldnt really do it because my friend had a bko and a whole slew of problems would just keep reoccuring even after trips to ICD for repair. I would save up and buy a RT ULE or a better electro

[penguins_r_kewl]

Originally posted by Danman69
I would save up and buy a RT ULE or a better electro

:agree:

[Ballin'King]

Originally posted by Ballin'King
Im talking to him on MSN and he said the lpr only leaked when you turned it in to to far, and said it was a safty feature so you couldn't shhot like 320 fps. And the only other thing was the noid leaked a few times and all it needed was the be tightened.

So does this happen on all BKO's, if you turn the LPR in to far it leaks a bit? And is it hard to set the HPR and LPR so the gun operates right? He said pressure is at 260 goiing into the LPR, so the LPR needs to be set right. (he said it didn't cycle sometimes becuase it wasnt set right) So is this all normal? HELP ME!

[DirtMcgirt]

Originally posted by Ballin'King


So does this happen on all BKO's, if you turn the LPR in to far it leaks a bit? And is it hard to set the HPR and LPR so the gun operates right? He said pressure is at 260 goiing into the LPR, so the LPR needs to be set right. (he said it didn't cycle sometimes becuase it wasnt set right) So is this all normal? HELP ME!


yeah if you turn the LPR enough, it'll leak. just set your HPR to like 220 or so and then adjust the LPR for velocity.

problem solved.

[AR55 MtM]

Even if the gun is broken it shouldn't cost no more than $50 to fix it I say go for it :tup:

[Ballin'King]

Ok, you have boosted my lets say "buying confidence" I think im gonna go for it. :D Thanks.

[Spinach]

Your Welcome.

[Ballin'King]

lol, you never even posted...:laugh:

[nahthan]

Originally posted by Spinach
Your Welcome.
:eyes: :laugh:
You are welcome, Ballin' king