angel stock reg consistency

[chandlern1]

i was wondering how consistent the stock angel reg is? and if sum one might want to trade or sell one?

[AllOleander]

Well, from the factory it is way overgreased.. so after you put some paint through it it should be very consistant (i bet only 3% of ppl who have angels replace the stock reg) .. you just need to put some rounds through it so the air will get rid of all the extra grease on the reg

[filasophikal]

also check if the shims are facing the correct way, because sometimes, if the consistency is bad, and your gas hogging, it could be that the shims are not facing the correct direction. other than that, its one of the best regs out there, very consistent.

[Alpha-Omega]

Hm well its a low cell volume regulator kinda like a stock bushmaster regulator their ok and work great with angels. I just replaced mine with the new mac dev gladiator set up with the mac dev ASA it looks kinda weird but its really nice and works great! I'll post some pics up but I need to find my digi....

[Trppen37]

Originally posted by filasophikal
also check if the shims are facing the correct way, because sometimes, if the consistency is bad, and your gas hogging, it could be that the shims are not facing the correct direction. other than that, its one of the best regs out there, very consistent.


what way are they suppposed to be faced?? :P

[brad85]

the right way........lol

[VeNoM]

wow a thread with allol in it . . . this is old :eek: . . .

[wolverine]

Originally posted by Trppen37
what way are they suppposed to be faced?? :P

There are 4 disc's that make up the spring pack. They should look something like this

><><

If that does not make sence, go to www.angel-owners.com and in the tech section find the LCD manual. In there you can see a picture.