O-rings on slick shot ram.

[IwAnNaShOoTyOu]

i finally got around to installing my ndz slick shot ram and dont know where the provided o-ring goes, also if i need to use the orings from the old shaft for the new one, and also should i locktite the hammer or not? thanx

[IwAnNaShOoTyOu]

cmon guys....i need to put this thing in

[ikey]

wow, i mnea i dont want to sound meanbut cant u look at ur stock ram and tell where the o ring is saposed to go? no u dont use the stock o-ring. the o-ring on ur ND ram is smaller and this helps the ram move easier. it goes in the slot oposite the side with the threads. and yes u do need to put locktite on the hammer to keep the hammer from coming loose during play. just put the locktite on the threads of the ram, and screw it in. however i would not use the weakest locktite. i would use at least blue strength.

[master_chadwick]

The provided oring goes in the slot around the part that goes into the ram housing. you won't need to use any o-rings from the other ram. infact look at the old ram and that will show you where to put the provided oring on the slick shot. and yes its recommended to loctite on the threads conecting the slickshot to the hammer itself. The directions recommend red but blue will work just dandy

EDIT: why am i always beat to the punch...doom on you :P

[IwAnNaShOoTyOu]

when i pulled out the old shaft there were 2 orings on it on on the front and one in the middle of the widened part, should i put the one that was one the front and looks like a bumper on the slick shot?

[master_chadwick]

the slick shot should have 1 oring on it on the big part whats slotted for and oring to be seated

[IwAnNaShOoTyOu]

the other one that came out kinda looks like a bumper so that the ram doesnt hit the assembly, could that be it?