well....like other 1 else i need help

[Azn_Boy]

WOOT i havent asked for a gun problem help since like 6 months ago...

but here i go my gun is leaking...right from that small lil brass thing under the front cap hooked on the reg asa thing

i dont kno if i have to lube it or something...it doesnt effect the way it performs but makes me lose gas more but slowly and its kinda annoying hearing a faint hiss...

so...ur help will be appreciated....and ur out there TPD UR HELP WILL BE REALLY APPRECIATED but other ppl will still be good:D

[nos911]

What's your input pressure at?

[Ultimate_Pyro]

hey man i had the same problem....just take ur reg apart lube it up and it should all be good to go..... (its what i did)

[10-brink]

dont you mean lose gas more... fastly?

[toothpastedog]

well if it is that little brass thing aka PRV (pressure relief valve/blow off valve) then you need to do the following:

check your input (to the solenoid if you have an lpr), and if it is above 200psi, turn it down. if that doesn't make it go away, then you need to buy a new prv. if that doesn't work, you need to lube you maxflo. probably you just need to turn down you input. new prv's are like 2$.

[nos911]

Originally posted by toothpastedog
well if it is that little brass thing aka PRV (pressure relief valve/blow off valve) then you need to do the following:

check your input (to the solenoid if you have an lpr), and if it is above 200psi, turn it down. if that doesn't make it go away, then you need to buy a new prv. if that doesn't work, you need to lube you maxflo. probably you just need to turn down you input. new prv's are like 2$.
That's basically what I would have responded with.

:dodgy: