PDA

View Full Version : Co2 on bushys

sajoedawg
12-02-2001, 08:00 AM
Would it be ok if i got a palmer stabalizer (and replace it with the stock reg)to run co2?????
ArchDingo
12-02-2001, 08:59 AM
no
AllOleander
12-02-2001, 10:00 AM
Originally posted by ArchDingo
no

??

You could make it work.

Co2 will run on bushmasters w/ the right setup.

A stabalizer (or both) and a remote, or vertical co2 set up would keep out liquid co2. As long as you keep liquid co2 out of the marker it will do ok. Velocity spikes every once and a while (its the gas) but it will work ok. Just keep liquid co2 out by using a stabalizer, vertical co2 setup, or remote.

Good Luck.

its possible, not recommended
sajoedawg
12-02-2001, 10:02 AM
ok thanks
Richy_C
12-02-2001, 10:10 AM
IF you have to run CO2 get an impulse, but even then get nitro as soon as possible,
sajoedawg
12-02-2001, 10:20 AM
Do you hve to get an adj nitro tank???Would the new crossfire tank with the output pressure set at 450psi be ok?
Richy_C
12-02-2001, 10:33 AM
New bushies will work fine on presets.
overbear
12-03-2001, 08:22 AM
Long as you don't have a older bush, the presets work fine.

CO2 will work great in a bush IF:

1) Use a stabiliser
2) Run remote w/expantion chamber
3) Don't play in cold

I have run Co2 on my bush this way with no problems (purely to see if it worked)