Upgradin a g3 vf bl

[Littledevilpl]

I have a g3 vf bl and i just ordered a ventri bolt and i already have a dye ultralite on it and a expansion chamber wat else should i put on i was think electonic trigger frame but i could sell my piranha and buy a piranha pro and keep my barrel
wat should i do ??? thanks you can email me ur ideas littledevilpl@hotmail.com :eyes: thanks

[Dermen]

You should get a reg. If you go to pdpaintball.com they have a LP package that comes with a reg, Ram air chamber with high flow asa,spring kit, and turbo valve. They also have a custom valve pin that will help lower your pressure and they can install a guage in the asa if you want. I am going to get all this for my BL in the spring. Also I would get an anti-siphon tube installed in your tank. Or if you have the money get HPA.

[Cracker344]

it depends on where u play, and what u want out of ur gun. if u want it quiet u might want lp or accurate or what ever its up to u.

[Littledevilpl]

yea i really dont care about quietness what i really need it more accuracy wat do u think would help??

[MrStinky]

Barrel, bolt and maybe an expansion chamber.

[Cracker344]

also an antisiphon might help too

[Dermen]

Well you already have a good barrel. The only thing that will increase your accuracy is more consistency. With a reg you will get better consistency than an expansion chamber. HPA will also give you more consistency and you wouldnt have to buy a reg if you get a preset N2 tank.

[Saiyan_warrior]

I would still suggest getting a regulator if you buy a n2 tank if its preset. The reg is there to adjust the regulated pressure before it enters your valve, but then again you wont really need a second regulator if your reg on your tank is adjustable.

[Littledevilpl]

wats hpa ????

[Saiyan_warrior]

HPA = High Pressure Air

Usually having to do with nitrogen tanks compressed air tanks..same thing :)

[jdw_56]

yeah i got HPA on my STS but i haven't gotten a reg yet but my friend who had one(an aka sidewinder) lent me his and i saw quite a difference. get hpa, an expansion chamber won't do MUCH, it will do a little depending on where you live (is it cold?)if you live in AZ like me it doesn't make too much of a dif but i like HPA alot. to getting a new bolt, eh, whatever. get a new valve before that. and i hope you have a revvy.:)