Which One?

[BaconCN]

I Need Your Advice.

I'm Looking for an Electro for under 550, I was thinking of the Bushmaster or the Smart Parts Impulse or any other suggestions.

Thanks

[TLplus84]

I'm gettin an Impulse.I heard alot of good things about it...good trigger, nice accuracy, quiet, very nice reg, Co2 is good with it..i could go on and on..i say get an Imp,.

[DraXsuS]

470$ at xpaintball.com

http://www.pbreview.com/fpics/MajSpyder032001173940EM1ad.jpg

[TLplus84]

oh man where do i start. First off, the Em1 doesn't come with a nice barrel. THe Smart Parts Impulse comes with a Progressive, which is actually nice for a stock barrel. 2nd, the EM1 requires an elbow. It's a hassle. 3rd, the Impulse uses all standard threading. The EM1 uses English. 4th, The Smart Parts Impulse comes with the Max Flow Reg. The EM1 doesn't. 5th, the Impulse can use Co2 just as good as N2. The Em1 can't. 6th, the EM1 comes with a single trigger, while the Impulse comes with a double trigger. LASTLY~(drumroll) The EM1 costs $470. The Impulse costs $430. WHich do you think is the better deal AND the better gun? :D

[Edited by TLplus84 on 03-20-2001 at 07:03 PM]

[DraXsuS]

http://www.pbreview.com/fpics/MajSpyder032001175634cbr_blkslvr_fade_rev.jpg

The Cobra LCD Angel will have all the same features as the LCD from the factory above. PLUS it comes with our cnc milling work, your choice of hopper adapter, single or double trigger, your choice of anodizing colors and pattern and our Cobra logo engraved and nickel plated in the top of the breech and a whole lot of other extras. See below for additional items and a complete list.

Cobra LCD Angels come with:
- Cobra CNC Milling and Engraving
- LCD Low Pressure Internals
- Infinity Barrel 14" .687
- Cobra Barrel 12 or 14" .685,.689 or .693 (your choice)
- Govnair Grip Regulator (ASA threads)
- Cobra Single Piece VRA with or w/o a gauge hole *
- Single or Double trigger grip frame and trigger w/double set screws
- Trigger adjustment screw (takes out side to side play)
- Cobra Hopper adapter ( low or high rise)
- Cobra LPR Air Chamber
- Cobra SS Super Hammer
- Cobra Bolt (custom fit)
- Cobra Breech Knob
- Cobra Logo engraved and nickel plated on the breech
- Lifetime Warranty which includes parts and labor (first in the industry)
- Shut off Switch w/rubber boot cover (replaces yellow plug)
- LCD Intelifeed (internal wire and sight rail plug)
- Cobra Wall Charger (WDP approved)


ARE U SPEACH LESS!!!!!!:D

[Counterfeit]

That cobra costs just a little over 550 though :D

[elTwitcho]

Yes, here it is again... the angel is the best gun because it's the most expensive, and LOOK, an even MORE EXPENSIVE angel, which therefore, must be EVEN BETTER. And that's nowhere near 550 :)

[Joel Timberlake]

Originally posted by MajSpyder
470$ at xpaintball.com

http://www.pbreview.com/fpics/MajSpyder032001173940EM1ad.jpg

EM1's are scary.

[DraXsuS]

What to you mean Joel! Why is it scary?

[Creek]

I try the EM1 and got the Impluse my self.I like a few other guns also but wont even talk about them cause there around 800 bucks.You need too try it if you can before you buy it.Its a newer marker on the market so its not a real well know performer,per say as a cocker ,shocker,Bush etc.Runs real nice on CO2 which makes it better for some folks that can't get compress or nitro fills.I paid 450 for the gun but if it breaks it fixed for free.425 if all i want is what smart parts gives you,25 add on wasn't too bad .They got boards that make it full auto also. so there up grades out there.Also shocker barrels can be milled down .049 to fit the Impluse.In time after market will be in line selling stuff for this gun.

[DraXsuS]

TL!! COME ON!!! Ive made a Joke!! U supposed to laugh!!!

[Skull]

The Diablo Matrix, is amazingly acurate, and efficiant. Stock It's somethin like $520 i think. The BBT Mephisto would be my only other choice. Stock it's about $420 at http://www.paintballgear.com and i've never seen a better lookin gun for the price.

[Edited by Skull on 03-23-2001 at 04:46 PM]

[elTwitcho]

I've played a few games with a matrix, feels great, but efficient? wtf? Gas consumption on that thing is horrid. And no the gun wasnt messed up, I got it from my buddy Dave, who designed the matrix, and I'm assumin he knows how to take care of it:) Gun is also pretty simple to disassemble, and maintain, but it's out of the price range, and for that price, I like the timmy better :D

[polarbear]

Get a Shocker 4by4 they are about $530 (online). IMHO the Shocker is better than the Impulse or EM1. Shocker is low pressure, close bolt, and comes with the All American barrel.

[Joel Timberlake]

Originally posted by MajSpyder
What to you mean Joel! Why is it scary?

Because around here Shutters are the ****, and an electro Shutter would be the cats ***.

Joel - Knows Better To Own A Shutter

[TLplus84]

matrixes are 420?? damn now i'm deciding between the matrix and the imp...well..the Imp uses co2 great..i dono..

[TLplus84]

nm...Matrixes are 700...i think i'll stick to my Imp.

[elTwitcho]

The matrix is not 420