Steb by Step. how a timmy works.

[Paint Bulley]

Can someone do that?

Thanks,

[Omega6_Virus]

1. You pull the trigger
2. It fires.
Thats all I know. Maybe someone will write it out, I'm too lazy at the moment.

[elTwitcho]

No dummy, there are more than 2 steps

1) Pull Trigger
2) Anti-Chop eyes do something mysterious and magical
3) It fires


Or, if you really want to be specific...

1) Gun is gassed up.
2) Bolt and hammer slide into the back position, allowing a ball to drop into the chamber
3) Trigger is fired, which sends a signal to the chip
4) Chip activates anti chop eyes to ensure a ball is loaded. If not, it waits for a ball to load
5) When ball is properly loaded, the chip sends a signal to the solenoid
6) Solenoid switches air flow direction and air that was holding the hammer and bolt at the back now drives the hammer and bolt forward
7a) Forward motion of bolt seals off the breech with a paintball in it
7b) At the same time, the hammer hits the poppet valve
8) Poppet valve opens from the force of the hammer hitting it, sending air through the bolt
9) This air drives a paintball out your marker
10) Solenoid switches direction and air once again is pushing the bolt and hammer to the back of the gun
11) Hammer no longer is applying pressure to the poppet, and air stops flowing from the poppet through the bolt
12) See step 2