PDA

View Full Version : Piranha Vf Bl G3 Trouble!!

DonkeyKev
12-08-2001, 07:17 AM
i just got a brand new Piranha VF BL G3 two days ago and i filled my Co2 tank yesterday, but when i shot off some Co2 the gun started to leak and the whole tank leaked out! has anyone else had this problem? or does anyone know what the problem is?
Saiyan_warrior
12-08-2001, 04:13 PM
Where did you hear the c02 leaking?
DonkeyKev
12-09-2001, 05:36 AM
Originally posted by Saiyan_warrior
Where did you hear the c02 leaking?

when i was holding the gun the Co2 was coming out from around the trigger (i could feel it on my fingers).
psychopaintball
12-09-2001, 07:17 AM
Take the gun apart and check all the o rings until you find one that is messed up (that is the most likely problem with the gun)
Saiyan_warrior
12-09-2001, 10:25 AM
did you possibly remove anything from your marker that you forgot to put back in??
Dermen
12-09-2001, 01:53 PM
Make sure your vavle isnt in upside down. I heard somebody saying that they put their vavle in and put the screw in the wrong hole and it caused it to leek from the grip. Also when you check it make sure you put the black o-ring in first.
SubZero4 G2 VTL
12-10-2001, 04:31 PM
Sounds like the classic case of a cracked valve cup. I've seen this happen once before.

Time to take it apart and check your valve cup. If you don't see a crack, don't be fooled. It's there. It may just be a hairline fracture. Your gun should come with one or 2 spares.