03m OR 03/04 cocker with some ups????

[dfb399]

which one should i get??? the 03m's are sooooooooooooooooo cheap, but do not have good quality from what ive heard. the 03/04 cockers are durable , but they cost A LOT more. idk!?!?!?!

please help!!

the other option would be to go with the 03. but, i dont want to be throwing paint down at 20 bps. that could get COSTING. lol.

i would have NO interrest in shooting over 14 bps anyway, so wouldnt a cocker fit me good. thanks for the help guys!

how fast do u think i could shot on the 03m??? think i could hit 13???

[schoolsukz08]

O3m's are milled from WGP bodies (Or so I've been told) so you shouldn't have to worry about bad tolerances. But what ups does the other cocker have?

[dfb399]

none, i would buy an 03 cocker and put like a delrin bolt, bobm 3-way. bob long reg, micro rock LPR and some other stuff.....................................

[schoolsukz08]

Originally posted by dfb399
none, i would buy an 03 cocker and put like a delrin bolt, bobm 3-way. bob long reg, micro rock LPR and some other stuff.....................................

You know all of that will fit on a O3m right?

[TESballer]

O3m, its just plain cooler IMO plus not a lot of people know about draguns guns so you'll be noticed out of the crowd :nod:

im sry i like showing off my gun ;)

you can upgrade it just like you would a norm. cocker

[NC demolition]

O3m.. already comes with a delrin bolt etc... roller sear, 40g ultralite hammer, roller sear, adjustable trigger stop, the ram is slick as hell.. comparable to some aftermarket stuff

the bolt is high quality. you can oil it, whatever.. it won't swell.

the biggest "quality" issue is that when you time it, after you adjust the lug.. turn it in atleast another 1/4-1/2 turn. because it has a roller sear combined with a round lug, it makes it where the sudden pressure from the hammer will just let it roll right over the sear when the bolt closes. if you turn it in more, it catches better, but retains its short, snappy pull.. and releases much smoother than a non-roller.

[TESballer]

Originally posted by NC demolition
the biggest "quality" issue is that when you time it, after you adjust the lug.. turn it in atleast another 1/4-1/2 turn. because it has a roller sear combined with a round lug, it makes it where the sudden pressure from the hammer will just let it roll right over the sear when the bolt closes. if you turn it in more, it catches better, but retains its short, snappy pull.. and releases much smoother than a non-roller.

yea... uhh :confused: thats the reason why i stick to open-bolt

[VooDooAddict]

Originally posted by NC demolition
O3m.. already comes with a delrin bolt

Really?

[buddychad]

yeah it does, but the pull pin is vertical rather than horizontal, so if you want a replacement it'll be a little harder to find. but the one that come is plenty good in my experience

[VooDooAddict]

Originally posted by buddychad
yeah it does, but the pull pin is vertical rather than horizontal, so if you want a replacement it'll be a little harder to find. but the one that come is plenty good in my experience

Nice ... don't know why i thought for a moment that the O3 Electro and the O3m had the same aluminum bolt. Completly differant... one attaches to the air ram (O3) the other to the back block (O3m).

[dfb399]

do you guys think i could pull 12-13 bps on the 03m STOCK??? if i couldnt do it STOCK with a few trigger mods and such, could i then??? thanks for all of the help you guys have been giving me!

[schoolsukz08]

Originally posted by dfb399
do you guys think i could pull 12-13 bps on the 03m STOCK??? if i couldnt do it STOCK with a few trigger mods and such, could i then??? thanks for all of the help you guys have been giving me!

You can't pull 12-13 on any mech cocker type marker stock.

[NC demolition]

i outshoot my TSA with mine... no blowback..

just get that trigger stop adjusted and bammo.. mine is super short.. like an E-spyder out of the box (long for an electro..) but heavier and smoother and snappier.

[schoolsukz08]

Originally posted by NC demolition
i outshoot my TSA with mine... no blowback..

just get that trigger stop adjusted and bammo.. mine is super short.. like an E-spyder out of the box (long for an electro..) but heavier and smoother and snappier.

Kev, you also say you shot faster then the cap on your BD. I won't believe it until you get me at least a sound clip.

[Moose0nTheLoose]

does anyone know where to find an o3m for under 170? that is the lowest that i can find them. that is still low but lower is always better;)

[DarkeWolf]

if you decide to get the odyssey cocker, just dont buy it straight from odyssey. theres a couple of threads around here stating why, but basically, they arent filling the orders for them, and arent giving refunds.

[Moose0nTheLoose]

i dont know if you were talking to me or not but anyone looking for an o3m should look at actioncenterpaintball.com. $179

[DarkeWolf]

moose- mine was directed to you both. afraid I dunno if you can find them cheaper or not tho, cause right now I'm shopping mostly for parts, and ups. not whole markers. :/


I'll expand on what I said tho, if the place shows them out of stock, dont order for a backorder. cause odyssey isnt making them anymore. I also noticed that pbdiscount on ebay has had a couple for sale, that never got delivered, so those arent being shipped either.

[Moose0nTheLoose]

hmm. i just found one on ebay for 170. its slightly used and he says it has had about 100 rounds through it. it has a drop(i will take off anyway) and qev's installed though. it is in black to blue. i can get that or just get it new for 10 dollars more than get qev's later. i think i like getting things new better.
useless question: matte black to blue body or silver body? opinions:P

[teswkit]

if i we're u get a Drallion, but thats me, but other wise thats a pretty good deal, also look for BE Rainmaker's those look cheap but those are rare

[DarkeWolf]

yeah, the drallion is a better marker than the 03's but a lil harder to find at a price that is comparable to what he's looking at.

If its only ten dollars dif, I'd go with new, but thats me. when it comes to certain things, I like to be the one to break them in. Blue to black is my opinion