Soleniod screw loosens, loctite?

[avbrann]

I have a 2003 BKO.
The solenoid comes loose from the body causing a leak.
Wanted to know if i can use blue loctite on those two small screws to keep them from coming loose.

This has been a long hard road with this gun since not too many people buy guns above spyders or any other blowback out here.

[supernothing76]

search

[Bigshot]

Originally posted by supernothing76
search

1. Do you have the Manuel? if so then you can find your answer there. But for all i know Yes you can just don't glob it up. a drop should do it. Correct me guys.

[ShootPaint]

How often are the screws coming loose???

If it has only happened once then I would tighten them up and run with it. I wouldnt recommend loctite on the solenoid screws. They are extremely small and if you forget it is on there you could snap them off before you know what happens, even with blue loc-tite!!! Trust me on this one. I found out the hard way and had to purchase a new manifold for one of my old 2K's.

If you see the screws coming loose on a constant basis then you could use loc-tite to cure this problem. I agree with Bigshot when he said you didnt need more than a drop. I probably wouldnt even use a full drop. I would get a little loc-tite at the tip of the bottle and then rub the screw on it to get amount that you need.

[ImpYa]

Amazing what you can find in the FAQ...

http://www.pbreview.com/forums/showthread.php?s=&postid=2058730#post2058730