1__SpLaTtEr__1
11-08-2004, 10:06 AM
I have decided to make a how-to thread on painting Tippmanns. There have been a lot of questions from Tippmann Newbies on how to do this, Me and Slayer had a convo. about this on MSN..... First Off....
1. Because of the frame material, Tippmanns cannot be annodized! This would cause a corrosion in the shells.
2. Tippmann shells can be spray painted, or just painted.
Slayer and I have both done this process, it does work.
Slayers 98c: http://img.photobucket.com/albums/v281/27Splatter27/Paintball%20Stuff/finished98c.jpg
Here are some basic steps for doing a paint job on your Tippmann.
Materials:
1. Sandblaster or Sandpaper (for paper, somthing like a 60 grit to start, and around like a 400 to smooth)
2. Paint Remover.
2. Primer, not just any primer though, auto body primer. Here is a link to the stuff that I found and will be ordering.
http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=1141&itemType=PRODUCT&iProductID=1141
3. Paint! Pick your colors and brand. I used Glossy red and Glossy black Krylon spraypaint cans. Also, you will want to get a bottle of clear paint. This will keep your job from chipping and leave a glossy shine to it.
Procedure:
1. Begin by sanding down the metal on the maker, paint remover will also come in handy here. Sand until shiny with 60 grit, then use 400 to smooth.
2. Spray Primer on. Make sure to cover everything that will be getting painted. *MAKE SURE PRIMER DRIES BEFORE MOVING ON*
3. Once primer has dried, start painting! Do what ever fade/camo pattern your little heart desires.
4. Once you have finished your desired paint job, cover up by spraying on the clear paint. let dry, and admire! This should work flawlessly if done right.
If you want me to add anything, or you need help with this, PM me, and it will be done!..... Hope this helps!
-Splatter
1. Because of the frame material, Tippmanns cannot be annodized! This would cause a corrosion in the shells.
2. Tippmann shells can be spray painted, or just painted.
Slayer and I have both done this process, it does work.
Slayers 98c: http://img.photobucket.com/albums/v281/27Splatter27/Paintball%20Stuff/finished98c.jpg
Here are some basic steps for doing a paint job on your Tippmann.
Materials:
1. Sandblaster or Sandpaper (for paper, somthing like a 60 grit to start, and around like a 400 to smooth)
2. Paint Remover.
2. Primer, not just any primer though, auto body primer. Here is a link to the stuff that I found and will be ordering.
http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=1141&itemType=PRODUCT&iProductID=1141
3. Paint! Pick your colors and brand. I used Glossy red and Glossy black Krylon spraypaint cans. Also, you will want to get a bottle of clear paint. This will keep your job from chipping and leave a glossy shine to it.
Procedure:
1. Begin by sanding down the metal on the maker, paint remover will also come in handy here. Sand until shiny with 60 grit, then use 400 to smooth.
2. Spray Primer on. Make sure to cover everything that will be getting painted. *MAKE SURE PRIMER DRIES BEFORE MOVING ON*
3. Once primer has dried, start painting! Do what ever fade/camo pattern your little heart desires.
4. Once you have finished your desired paint job, cover up by spraying on the clear paint. let dry, and admire! This should work flawlessly if done right.
If you want me to add anything, or you need help with this, PM me, and it will be done!..... Hope this helps!
-Splatter