Oiling Piranhas

[RickyC143]

I have herd of two ways on how to oil your piranha (fast)
now, i want to know which way is the correct and most successful way to oil your marker.

1- put a few drops into the Ram Air Chamber and dry fire.

2- put a few drops into the ASA (where the co2 gets screwed into)
and dry fire.

which one works, and if so which one can mess up your marker?

P.S.
I have tried putting the oil in the Ram Air chamber and the oil does seem to travel through the internals.

thanks for any replys

Ricky

[death]

i have a spyder, and the piranha is a spyder copy (yes, it's the truth) and putting oil on the asa is really simple and easy way. but i usually oil my gun BEFORE i go to play.

[phatboy]

well first take off the barrel and heed any warnings that read "Use No Oil." Put 4-5 drops of oil in the ASA and then screw in your tank and fire approx. 20-25 shots. This will do the trick. Now screw your barrel back in.

[RickyC143]

I'm not wrong when i said that the ASA conects the Co2/nitro to your marker Right?

putting oil in there won't ruin the Expansion Chamber?

[death]

putting oil on the asa will work fine. - if liquid co2 won't kill the x-chamber than i doubt a couple drops of oil will even harm it.

[RickyC143]

ok Thanks