Chaos Chip and Chaos Board?

[BunkerBuddy_666]

Is the Chaos Chip, and the Chaos Board the same thing? what are they, and where do they have to be installed in the marker, and how?

[nirvana1234]

you want the chaos board, the chip is for older b2ks and bkos

the board is better...shootpaint tell him y...

[BunkerBuddy_666]

Does the Chaos Board go in the grip, to replace the stock one? it looks a little too big to go there. and how do u install it?

[Avery_mac]

i can't find the chaos board anywhere where can u buy it for how much?

[Kowz_76]

www.vaporworks.net
www.tantrumpaintball.com
www.shootpaint.com <not 100% sure, but they have lots of bushy ups.

Has them. They're around $80 I believe.

Yes, the chaos board goes in and replaces the stock one. It'll fit in your 2k4 BKO.

[BunkerBuddy_666]

Aiight.

thanks alot.

EDIT: I checked out shootpaint.com and i saw the board. whats the diffrence between SO and MAX chaos board? how would i install it? is it simple enough to do by myself, or do i need to get someone else to do it?

and, does shootpaint.com ship to canada?

[lotus_esprit5]

the SO board is the semi-only board. Semiauto is the only firing mode. The MAX version also has full auto, autoresponse, and turbo firing modes. The SO and MAX boards have the same eye, dwell, speed, debounce settings, etc, the only difference is that the SO board doesnt have the other firing modes.

I'd get the MAX board. For the same amount of money you might as well have the extra modes. And the MAX board is tournament legal because it has a tournament lock feature which can be used to "lock" it into semi during a tournament.

to install it, its this simple:
-take out the screws on your grips.
-Remove the grips.
-unplug stock board from wiring harness.
-plug Chaos board into wiring harness (the Chaos board is actually about half the size of the stock board, so dont worry, it fits. It's about 1 inch by 1 inch)
-put the grips back on and screw the screws back in.

And thats it!

For instructions on installing and programming a Chaos board read the instructions/manual at www.vaporworks.net

[BunkerBuddy_666]

TY SOOOOOOO MUCH lotus_esprit5!!

on my 21" moniter makes the board look soo darn big, lol.

EDIT: one last question, is the board compatable with a bko without a pds (or the eye)? if so, would i still have to configure those settings, or leave them alone?

[ImpYa]

Lotus, I know its a simple matter, but you should write up a chaos installation guide with pics.

I'll put it up in the Guide if you do it.

[BunkerBuddy_666]

well, if an idiot like me someone that know how to change a battery can understand it, i think they would know how to unplug a board.

im new to this forum and new to the BKO (got it a week ago) and i dont still quite know how to work it yet. i hate adjusting the regs. i got them to work, but they screwed up again. (i guess it take pratice).

And then my parents wanted to know what i wanted for christmas and i said i wanted the chaos board and they are worried about my not knowing about how to work it, and install it.

BTW, imya, i reffer myself to your stickie all the time, and it has helpes me ALOT! keep it up.

[ImpYa]

Originally posted by BunkerBuddy_666
well, if an idiot like me someone that know how to change a battery can understand it, i think they would know how to unplug a board.

im new to this forum and new to the BKO (got it a week ago) and i dont still quite know how to work it yet. i hate adjusting the regs. i got them to work, but they screwed up again. (i guess it take pratice).

And then my parents wanted to know what i wanted for christmas and i said i wanted the chaos board and they are worried about my not knowing about how to work it, and install it.

BTW, imya, i reffer myself to your stickie all the time, and it has helpes me ALOT! keep it up.

I wasnt implying that you were dumb man. Im sorry if it came across that way.

What I was saying was that it should be pretty easy for Lotus to make up a guide.

Anyways, thanks for reading up. I have invested a lot of time in it.

[BunkerBuddy_666]

lol, u took it the wrong way, i was calling myself an idiot. you said nothing offencive.

I can tell that you ALOT of effort into that thread. i read every word in it.

If you,d like, i could make up a guide. but i dont have the actual chaos board to take a pic of. ill take a pic off the internet, and circle the part u plug it into. Ill get around to that sometime tommarow.

[ImpYa]

Originally posted by BunkerBuddy_666
lol, u took it the wrong way, i was calling myself an idiot. you said nothing offencive.

I can tell that you ALOT of effort into that thread. i read every word in it.

If you,d like, i could make up a guide. but i dont have the actual chaos board to take a pic of. ill take a pic off the internet, and circle the part u plug it into. Ill get around to that sometime tommarow.

LOL, anyways let me know when you get the guide done.

[lotus_esprit5]

crap crap crap! :banghead:

My digicam wont work with my computer. They dont get along very well. With the amount of time I've been here, I still havent even put my gun in the pic thread.

Its great to see someone who uses the FAQ though.

I wanna expand the installation section of the FAQ though. If I eventially find a way to get pics I'll get to work on that. bunker, be our guest if you wanna do the Chaos installation guide. Just take my steps and take a pic of each one and you're set.

As for the eye configuration. There is an "eye bypass" mode on the Chaos board. Its 6 blinks, then one blink. You need to bypass the eyes because otherwise the board automatically caps itself at 12bps because it cant detect the eyes and assumes they arent working. Thats all you need to mess with as far as eye modes go.

[BunkerBuddy_666]

lol, my sister lent my digicam to her bf without asking me.....

Yeah, i thought so too, i read the configuration guide, and i just got a lil' confused about that part.

[yoda101]

Originally posted by ImpYa


I wasnt implying that you were dumb man. Im sorry if it came across that way.

What I was saying was that it should be pretty easy for Lotus to make up a guide.

Anyways, thanks for reading up. I have invested a lot of time in it.

I am planning on putting a reassembly guide together once i start putting together my custom milled b2k. Right now though I am markerless so that doesnt help me much

[BunkerBuddy_666]

we're talking about a 04 bko, not a b2k. its probably te same thing anyways.

[ImpYa]

Originally posted by BunkerBuddy_666
we're talking about a 04 bko, not a b2k. its probably te same thing anyways.

He is just saying that he is making up a guide, since we are on the topic.

The BKO valve install is pretty much a disassembly guide and assembly guide for the BKO anyways.

[BunkerBuddy_666]

Originally posted by ImpYa


He is just saying that he is making up a guide, since we are on the topic.

The BKO valve install is pretty much a disassembly guide and assembly guide for the BKO anyways.

Yeah, i kinda thought so.

[lotus_esprit5]

The BKO valve install is pretty much a disassembly guide and assembly guide for the BKO anyways. Dude I hate that! not the guide, thats fine....but I hate how you have to take the gun most of the way apart just to get the stupid valve out. I need to clean mine but I'm lazy. Oh well I guess I might as well do it since my gun's mostly disassembled anyway.

[ShootPaint]

Originally posted by BunkerBuddy_666
does shootpaint.com ship to canada?

Yes we export/ship to canada.

[ImpYa]

Originally posted by lotus_esprit5
Dude I hate that! not the guide, thats fine....but I hate how you have to take the gun most of the way apart just to get the stupid valve out. I need to clean mine but I'm lazy. Oh well I guess I might as well do it since my gun's mostly disassembled anyway.

I used to take my guns apart for fun. I wasnt happy until I knew how every little part worked.

[yoda101]

Originally posted by ImpYa


I used to take my guns apart for fun. I wasnt happy until I knew how every little part worked.

i still do that with every marker i get =)

[ImpYa]

Originally posted by yoda101


i still do that with every marker i get =)

Haha, I guess I do too!

[yoda101]

Originally posted by ImpYa


Haha, I guess I still do too!

nice double post moron :P

[ImpYa]

Originally posted by yoda101


nice double post moron :P

You have always spoken to me in a kind manner:rolleyes:.

Anways, I just wanted to make sure you got it.

[yoda101]

Originally posted by ImpYa


You have always spoken to me in a kind manner:rolleyes:.

Anways, I just wanted to make sure you got it.

You keep forgetting I am not slow like Lotus is sometimes :P . Anyways i think that is one of my fav parts about ICD markers is they are sooooo easy to break down and rebuild. Because its so easy to do I tend to do it every other week just to make sure my marker is up and running at optimal at all times. It is probably a bit excessive and overkill but oh well i dont care

[lotus_esprit5]

You keep forgetting I am not slow like Lotus is sometimes that.....hurt......:(