Just Bought A New B2k4 W/pds....

[adrenaline54]

ok i just bought a new b2k4 w/pds after having a crappy non-vison impulse..im hopeing this will work for me and not have the body get stripped were the feedneck goes in.....does that happen ever on icd guns?

[nirvana1234]

not really...better metal...im sooo jealous of you(b2k5 doesnt come out till march!)

[cheddar]

I also just bought one, and I have a question for you nirvana, if you hold your gun (looking at the side with the on/off switch) above the regulator, between the barrel and trigger frame area, can you see through a small slit and see the wires?

[nirvana1234]

Originally posted by cheddar
I also just bought one, and I have a question for you nirvana, if you hold your gun (looking at the side with the on/off switch) above the regulator, between the barrel and trigger frame area, can you see through a small slit and see the wires?

i dont own a b2k yet(sadly...even though i act like i do,soon though) so i wouldnt know, but wait till lotus or impya some in to help you. sry bout that(i feel bad, that i dont know it:bawling: )

i think you mean the tray... like between the tray and the body...right

[ImpYa]

Originally posted by cheddar
I also just bought one, and I have a question for you nirvana, if you hold your gun (looking at the side with the on/off switch) above the regulator, between the barrel and trigger frame area, can you see through a small slit and see the wires?

Do you mean under the eye cover?

Remove you eye cover and check to see if the wires are being pinched.

[adrenaline54]

dude i just got my b2k4 w/pds ...........DAMN it is one hott *** gun and its soooooo nice.....

[ShootPaint]

Wait until you do some minor mods to it and watch it really rip!!!.

The B2K right out of the box is a very hot marker but with the addition of a HPR, LPR, Valve and Electronics that same marker that you think is great now is going to really impress the hell out of you!!!!

[adrenaline54]

yea.....

[lotus_esprit5]

if you hold your gun (looking at the side with the on/off switch) above the regulator, between the barrel and trigger frame area, can you see through a small slit and see the wires? That shouldnt be happening. It sounds like theres a slit between your body and tray? (the tray is the piece that has the on/off switch in it. It connects the body and the trigger frame).

Look at the bottom of the gun. There are 4 screws there that are in the corners of the tray. They connect the tray to the body of the gun. Use a 7/64 allen wrench to make sure they are all tight. If you dont have a 7/64 (its kind of a weird size) then get one, you'll be glad you have it. Dont overtighten the screws, that would be bad, especially if theres a wire pinched in there. Just make sure they arent loose. If they are loose tighten them, and then check and see if the slit is still there.

If the slit is still there you may have a pinched wire (which would be unusual between the tray and body), unscrew the 4 tray screws and remove the tray from the gun body, but be careful since there are wires that connect the tray to the body and you dont want to rip them out. Now put the tray and body back together, making sure there arent any wires pinched in between the two pieces. Put the screws back in. Check and see if the slit is still there.

If after all this the slit is still there, the tray may have been cut wrong or something. Call ICD about it and see about sending you gun in to get it checked out, maybe you'll need a new tray. I've just never really heard of this happening before.

[cheddar]

Hrm, didn't think that a wire could be pinched (didn't see it) but it was - so now the gap is closed - no more wires! Thanks