Chop Ball Without Vision?

[Impulsefrenzy]

Hey,
I just bought a new impulse basic, no vision eye, I did get a halo B hopper though, my question is will i be choping balls if im shooting 15 bps without vision. I also dont have the money to buy a W.A.S. board or any other board, so can you help me out and tell me your opinion?

[toothpastedog]

you WILL NOT chop. you board is capped so low (@13.7 bps) and your hopper can feed so fast (@20+bps) that unless your hopper is about to run out of balls, you will never chop. just keep your halo full, and you'll be fine... guarenteed!

[Impulsefrenzy]

Wait so the stock bored on there will limit you down to 13? Im just ganna buy a WAS bored but i heard they were wicked on back order...ARE THEY?

[toothpastedog]

no, if you order on, and it says they are in stock, you should get it in 1-2 weeks. yeh, the impulse is capped at 13.7 bps with the stock non vision board... and the vision board is capped at 20bps...

[naught]

hes right with such a fast hopper it will be really hard to break balls. Test it on another gun if you want. I did this, took a 98c loaded it up with a standard gravity hopper, and outshot it. What do you know i broke a few balls. Put a reloader b on that thing and no more balls breaking. The only way you'll break a ball is if the bolt is closing faster than pbs are feeding....and in your set up 22bps (halo b i think) feedrate and 13 bps fire rate.

[toothpastedog]

exactly :)

[Dark Master]

I hate that 13bps cap too. :(

[toothpastedog]

don't we all... who don't own a WAS board that is :devil:

[The7thDragon]

Originally posted by toothpastedog
you WILL NOT chop. you board is capped so low (@13.7 bps) and your hopper can feed so fast (@20+bps) that unless your hopper is about to run out of balls, you will never chop. just keep your halo full, and you'll be fine... guarenteed!

i dont know how but some how i still manage to chop on a Halo B....... and im using the standard blu light cricket w/o vision.

then again does anyone else's halo sound like its reving (like an engine) when it feeds?

[toothpastedog]

yeh, it should... you just need to keep you hopper full and you wont chop. check your detents-they might be letting the gun chop...

[naught]

try fine tuning your gun that 13".7"= a chop, well it has in past expirence

[toothpastedog]

what was that 13".7" ???