I Win, AKA Paintball Science Fair Project v.3.1 (PICS!)

[PMI_Guy]

Ok, so, the paper is due monday. Today being Saturday, i'd figure i'd better go on and get my lazy self up and do the experiment...

Here are the pictures...and the results are quite shocking to me...but you guys can't know till I turn in the poster in December.

:dodgy:
By the way, im not the clown in the pictures. That my lame friend, Chris.
Enjoy!
http://www.lynncoulter.com/DSC00002.JPG http://www.lynncoulter.com/DSC00003.JPG http://www.lynncoulter.com/DSC00004.JPG
http://www.lynncoulter.com/DSC00006.JPG
http://www.lynncoulter.com/DSC00007.JPG

[PMI_Guy]

http://www.lynncoulter.com/DSC00008.JPG http://www.lynncoulter.com/DSC00009.JPG http://www.lynncoulter.com/DSC00011.JPG http://www.lynncoulter.com/DSC00015.JPG http://www.lynncoulter.com/DSC00016.JPG http://www.lynncoulter.com/DSC00017.JPG http://www.lynncoulter.com/DSC00021.JPG
http://www.lynncoulter.com/DSC00020.JPG

In that last picture, I might be the one on the right... :dodgy:

[can'tthink of1]

Should of used the SAME barrel on either marker, and knowing SP, the 2 freaks might actually differ....

[Bigshot]

Originally posted by can'tthink of1
Should of used the SAME barrel on either marker, and knowing SP, the 2 freaks might actually differ....

The results of what? Post them when you can

[spyder_king06]

cool.

[Bigshot]

Oh i see. your testing the boards strength.

[cutomcocker1]

Originally posted by Bigshot
Oh i see. your testing the boards strength.

:laugh: :laugh:

use the same barrel in both...also you might try a different inline on cocker, i haven't had good expiriences with the stock...

[Canadia_PBaller]

You mean....the paintballs actually made it out of the Freak without chopping? That's a first........:eyes:

[mokalman]

Originally posted by cutomcocker1


:laugh: :laugh:

use the same barrel in both...also you might try a different inline on cocker, i haven't had good expiriences with the stock...


Umm.....Okay?

[spunkey]

Originally posted by Canadia_PBaller
You mean....the paintballs actually made it out of the Freak without chopping? That's a first........:eyes:
yes,because the barrel chops balls:rolleyes:

[evilhomer]

I thought that was your Mag on PBN... Good job, good luck in the fair :tup:

Edit: Maybe it was AO... I don't remember...

[MA_paintballer]

Kaner>Freak
But anyways what was your experiment?

[|GB|]

Good luck, PMI!


Btw, nice sticker on that truck. :tup:

[PMI_Guy]

Haha, I posted it on both AO and PBN.

Why?

Cause I have 40GBs a month just sitting there....

and this is bound to take a chunk out of it.

:devil:

[Canadia_PBaller]

Originally posted by spunkey

yes,because the barrel chops balls:rolleyes:



Yea...actually they do. And the Freak is ALOT more prone to barrel breaks than any other barrel I've ever used. And of course the barrel chops balls, it's called a barrel break. Noob. :rolleyes:

[STO Balla 22]

What were you trying to prove?
Come on, give us some info.

[PMI_Guy]

That accuracy dosen't depend on the operation of the bolt. (AKA Closed vs. Open)

[werty7373]

Originally posted by PMI_Guy
That accuracy dosen't depend on the operation of the bolt. (AKA Closed vs. Open)
well you didn't prove anything with that expirement.

[PeYToN-SS]

Originally posted by werty7373

well you didn't prove anything with that expirement.

Now how did you come to that conclusion?

[|GB|]

Originally posted by PeYToN-SS


Now how did you come to that conclusion?



Duh, closed bolt is more accurate then open bolt.


[/Sarcasm]

[LAMANTEthePBguy]

I think the results might have been more accurate if you had tightened the vice a little more.

[sain]

With a little bit of upgrades that mag could easily be made to resemble a 03 shocker.

[cutomcocker1]

Originally posted by sain
With a little bit of upgrades that mag could easily be made to resemble a 03 shocker.

why the hell would you want to do that? :yuck:

[CosMoKramer71]

http://www.tshirthell.com/shirts/products/a375/a375.gif

[Bigshot]

how is this relivant to the thread and how does it contribute to the thread if it is relivant.

[|GB|]

Originally posted by Bigshot
how is this relivant to the thread and how does it contribute to the thread if it is relivant.


It dosent. He must be part of the moron population.

Anyways, lets get back on topic, shall we?

[kangaroodent]

Originally posted by |GB|



It dosent. He must be part of the moron population.

Anyways, lets get back on topic, shall we?
Look at the sticker on the window of the truck in the first picture.

[PMI_Guy]

So your going to spam up my thread with THAT becuase I support Bush?


Way to go. :tup:

[CosMoKramer71]

http://img88.exs.cx/img88/2787/new_map.jpg

[Bigshot]

Give up while your behind.

[CosMoKramer71]

:pissed:
KILL THE BABIES!
KILL THE BABIES!
KILL THE BABIES!KILL THE BABIES!KILL THE BABIES!KILL THE BABIES!KILL THE BABIES!KILL THE BABIES!KILL THE BABIES!KILL THE BABIES!

[Bigshot]

Is this guy pissing anyone else off?

EDIT: i found away for him not to bother me :D (http://www.pbreview.com/forums/member2.php?s=&action=addlist&userlist=ignore&userid=47912)
click the ":D"

[Killer Kat]

Originally posted by Bigshot


EDIT: i found away for him not to bother me

I did too...
In fact he won't be bothering anyone, anymore,
ever!

[STO Balla 22]

Wow...way to go out with a...bang? :rolleyes:
I think the results might be more conclusive if you actually posted results. Everyone here should know that closed bolt vs open bolt should yield the same accuracy, but how did you actually come to that conclusion?

[radishboy]

nice try, champ.

you would need to use the exact same barrel on both guns, along with the exact same reg setup, and the same tank. not to mention the p[aint was obviously from a different batch.

better luck next time.

[Bigshot]

Originally posted by Killer Kat


I did too...
In fact he won't be bothering anyone, anymore,
ever!

<3

Thanks :notwrthy:

[Canadia_PBaller]

Originally posted by CosMoKramer71
http://img88.exs.cx/img88/2787/new_map.jpg




That's gold.

[reneirwolf878]

Been there done that. figured out the coefficients of friction of different materials of barrels. :)

Had to convert everything to metric system..which was a PAIN. I don't have the actual friction coefficients here, but as one can see, the Stiffi has the least amount of friction. (Made a "silencer" so that every barrel didn't have porting)
Results (http://members.cox.net/tranman87/Sci Fair Testing results (metric).xls)

[Jeezer]

Originally posted by CosMoKramer71
http://www.tshirthell.com/shirts/products/a375/a375.gif

Mmm too bad thats all bull crap and almost everyone who does bash bush doesnt know what they're talking about.

As for the science project, good going, tho I could see a couple of aspects of your test that can be revamped.

[PMI_Guy]

Originally posted by Jeezer


Mmm too bad thats all bull crap and almost everyone who does bash bush doesnt know what they're talking about.

As for the science project, good going, tho I could see a couple of aspects of your test that can be revamped.

Yeah, but part of the report was reflecting on things we could have done to make it better.

And its 12:00 at night and here I am waiting for 13 pages to print out on a ink jet... :freak:

[Jeezer]

Mmmm...purposely doing things wrong, must try that some time.

[PMI_Guy]

Originally posted by Jeezer
Mmmm...purposely doing things wrong, must try that some time.


I thought about improvments after the fact.

And the test should be atleast reasonably accurate.