toothpastedog
11-21-2004, 11:51 AM
PBWS’s Adrenaline Impulse (http://store.yahoo.com/paintballwholesalers2003-store/nastyimpulse1.html):
Cost: $499.00-599.00
--Stock 13.7 Bps Blue Light Cricket Board (+$100 for Vision)
--Adrenaline Bolt (Black, Blue or Red Derlin) with Adrenaline Gel Decal
--Adrenaline Stainless Steel Hammer & Shaft
--Derlin Valve
--Adrenaline Serial # i.e. A.I.00023
--Adrenaline GP Slide Check - which is an extremely fancy tapeworm. It's actually mechanical and moves back and forth to regulate airflow somewhat like a 14-way operates. Its an Air Check Valve. It functions the same or better as an LPR setup except it does not lower the operating pressure as much and will tend to operate around 165 psi. Those interested in a lower operating pressure around 135 psi should purchase the LPR option listed below. The GP takes up the entire right tube. It is made up of a rear tube where the mechanical parts are located and a threaded front tube that is colored or chromed for appearance and can be switched out for different colors (so the milled through "Adrenaline" name shows up differently). The GP Slide Check will not function along with the Adrenaline LPR setup and therefore the rear part of the tube of those who choose an LPR option will be for appearance only and operate as an airway only as all airflow management operations will be performed by the LPR and not by the GP Check Valve.
-- Adrenaline Low Rise or Adrenaline Hi Rise
----The Old AI TRIGGER FRAME
-- Un-adjustible Magnet, which make the trigger pull very hard and un-walkable
-- Need to remove the magnetic to even get a good trigger pull
-- Trigger pull length adjustment from .5mm to 5mm[/color]
--Adrenaline Chrome Button - Chrome on/off (cricket button) on the back replaces the black plastic one. It definitely adds a little bling-bling to the gun.
--Worlds First ever 4th Axis Impulse body - The Adrenaline Impulse body has been custom drilled for unique airflow and connections. Although this means some parts from other companies including smart parts will not fit or operate on an A.I. you wont want them to. We redesigned it for optimum performance and that is exactly what you will get. The Air inlet and the vertical screw has been moved forward to align the gas-through grip with the front of the grip frame rather than setting it back off of it. This allows for room to get your fingers in between it and the trigger frame which is required because we've moved the grip frame forward about 1".
-- Adrenaline Vertical Adapter or Adrenaline 15 Degree Adapter - These adapters are made to accept US threaded regulators and gas through grips. They will not fit stock impulses due to our customization of the body and adapter connections and airflow pathways but they fit the A.I. very nicely!
-- Double Trigger
--Adrenaline Gas Through Grip or Stock Vertical Maxflo Regulator - Hands down the most stylish and innovative gas-through to-date for the Impulse. Machined to match the rest of the Adrenaline Impulse. A visual beauty!
--Adrenaline Rear Hammer Cap
--Adrenaline Bolt Pin and Adrenaline Threaded Head - Look for additional stylish Adrenaline "pinheads" in the future.
--Adrenaline Stainless Steel Screw Set - We replaced all of the screws on the gun with stainless steel versions. Don't worry about rust, we've got you covered.
--Adrenaline Front Cap - These include an Adrenaline Gel Decal for those with GP setups and underneath the decal is an Allen screw. Should you choose to upgrade to the LPR setup at any later date, simply remove the Adrenaline Gel Decal, remove the Allen screw, thread in the Adrenaline LPR, remove the GP valve and insert the chromed air tube and you're good to go. Upgrade from the Check Valve to the LPR in less than one hour.
--Matching (both front AND back) freak barrel with choice of 1 insert (any size).
--Blasted, Satin or Polished Finish
--Solid Color, Fades or Custom anodizing
--Color matched soft-gel sticky grips with Adrenaline Gel Decals
The only difference between this is AI is that it is the “older” model than the one that is sold directly by Adrenaline. The only change is that the newer ones, only sold by Adrenaline, comes with a more adjustable trigger frame and has many more options, i.e. LPR Kit, Single or Double trigger, Full Freak Add on, not to mention the AI from Adrenaline comes stock with Vision, while you need to pay an extra 100$ to get it on the AI from PBWH
Cost: $499.00-599.00
--Stock 13.7 Bps Blue Light Cricket Board (+$100 for Vision)
--Adrenaline Bolt (Black, Blue or Red Derlin) with Adrenaline Gel Decal
--Adrenaline Stainless Steel Hammer & Shaft
--Derlin Valve
--Adrenaline Serial # i.e. A.I.00023
--Adrenaline GP Slide Check - which is an extremely fancy tapeworm. It's actually mechanical and moves back and forth to regulate airflow somewhat like a 14-way operates. Its an Air Check Valve. It functions the same or better as an LPR setup except it does not lower the operating pressure as much and will tend to operate around 165 psi. Those interested in a lower operating pressure around 135 psi should purchase the LPR option listed below. The GP takes up the entire right tube. It is made up of a rear tube where the mechanical parts are located and a threaded front tube that is colored or chromed for appearance and can be switched out for different colors (so the milled through "Adrenaline" name shows up differently). The GP Slide Check will not function along with the Adrenaline LPR setup and therefore the rear part of the tube of those who choose an LPR option will be for appearance only and operate as an airway only as all airflow management operations will be performed by the LPR and not by the GP Check Valve.
-- Adrenaline Low Rise or Adrenaline Hi Rise
----The Old AI TRIGGER FRAME
-- Un-adjustible Magnet, which make the trigger pull very hard and un-walkable
-- Need to remove the magnetic to even get a good trigger pull
-- Trigger pull length adjustment from .5mm to 5mm[/color]
--Adrenaline Chrome Button - Chrome on/off (cricket button) on the back replaces the black plastic one. It definitely adds a little bling-bling to the gun.
--Worlds First ever 4th Axis Impulse body - The Adrenaline Impulse body has been custom drilled for unique airflow and connections. Although this means some parts from other companies including smart parts will not fit or operate on an A.I. you wont want them to. We redesigned it for optimum performance and that is exactly what you will get. The Air inlet and the vertical screw has been moved forward to align the gas-through grip with the front of the grip frame rather than setting it back off of it. This allows for room to get your fingers in between it and the trigger frame which is required because we've moved the grip frame forward about 1".
-- Adrenaline Vertical Adapter or Adrenaline 15 Degree Adapter - These adapters are made to accept US threaded regulators and gas through grips. They will not fit stock impulses due to our customization of the body and adapter connections and airflow pathways but they fit the A.I. very nicely!
-- Double Trigger
--Adrenaline Gas Through Grip or Stock Vertical Maxflo Regulator - Hands down the most stylish and innovative gas-through to-date for the Impulse. Machined to match the rest of the Adrenaline Impulse. A visual beauty!
--Adrenaline Rear Hammer Cap
--Adrenaline Bolt Pin and Adrenaline Threaded Head - Look for additional stylish Adrenaline "pinheads" in the future.
--Adrenaline Stainless Steel Screw Set - We replaced all of the screws on the gun with stainless steel versions. Don't worry about rust, we've got you covered.
--Adrenaline Front Cap - These include an Adrenaline Gel Decal for those with GP setups and underneath the decal is an Allen screw. Should you choose to upgrade to the LPR setup at any later date, simply remove the Adrenaline Gel Decal, remove the Allen screw, thread in the Adrenaline LPR, remove the GP valve and insert the chromed air tube and you're good to go. Upgrade from the Check Valve to the LPR in less than one hour.
--Matching (both front AND back) freak barrel with choice of 1 insert (any size).
--Blasted, Satin or Polished Finish
--Solid Color, Fades or Custom anodizing
--Color matched soft-gel sticky grips with Adrenaline Gel Decals
The only difference between this is AI is that it is the “older” model than the one that is sold directly by Adrenaline. The only change is that the newer ones, only sold by Adrenaline, comes with a more adjustable trigger frame and has many more options, i.e. LPR Kit, Single or Double trigger, Full Freak Add on, not to mention the AI from Adrenaline comes stock with Vision, while you need to pay an extra 100$ to get it on the AI from PBWH