What do you have?

[Witt]

On this post put your gun adn any other upgrade or tank..Whatever you have for paintball..Put here...every gun you have..Every tank you have...Every spring you have,,Post here.!>!>!

[Witt]

Stingray, Model 98, Shutter, Dye Stainless, Winforce barrel, Brass Eagle 9 oz, Moly Mini 16 oz, Dye Sticky (Blue), Brass Eagle red dot site, 2 barrel plugs, Factory parts. ETC.

[elTwitcho]

I'm not gonna post any of my backup gear, but my main stuff is

PMI PE 68/3K Fiber wrapped tank
Vigilante with Low pressure spring
Shocktech chrome drop forward
Blue macroline with fittings
Low pressure modded Intimidator, dark blue/light blue fade
12 volt revvy clear
Neoprene Tank cover
And a buddy of mine will be making me a delrin bolt for my timmy

[Joel Timberlake]

Eh, I just sold my Model 98 with Ice Cold barrel but here it is.


Piranha STS ( Stock, hell, it's a week old. )
9 ounce
16 ounce
14 ounce
Hopper
Elbow
Barrel plug
Guppies
Glow Sight
And everything to fix/clean your gun.

[dalimus-thaden]

32* Rebel Limited Edition
14" Stone Cold II
20 oz. co2
9 oz. co2
JT x-fire mask
32* 4+1
coiled remote
vl 200 hopper W/ neoprene cover
32* throat guard
Brass Eagle gloves
Doskocil Gun Case

[Cory]

Shocker Turbo
16" all american
12" Big daddy
12V revvy
gadget grip
powerfeed
air assist
max flow regulator


Pro-Carbine
10" dye alluminum
14" tippmann sniper
12V revvy (yes i own 2)
starfire bolt
lightened trigger
vertical adaptor
expansion chamber
drop forward
pressure gauge on gun
2 micro line kits
rear velocity ajustor


Other
JT spectra thermal mask with goggle flague and thermals
Scott hot shot mask with thermal lenses
20 oz tank pin
16 oz anti siphon pin
16 oz anti siphon on-off
pure energy 68ci steel 3000psi tank
straight shot squigie
Raze pod holder
i also have a case of marbs and a case of allstar now
more but i can't think of it.

[blinkpk11]

stuff i got

blue spyder shutter
cp barrel .689 12inch black
shocktech derlin qwickstrip rearcocking bolt
turbo valve
mod. ASA (high Flow)
vigilante (LP spring)
polished internals
spyder elcd frame
Kapp DZ 2 cradle
Air America Melee 3k 48ci aluminum pre set
12volt revi
elbow, oil, squeege, etc.

stuff im geting soon

akalmp vert body
low rise feed
kapp amgle VA
milling and ano. job from cobra pb
barrels, barrels and more barrels

[TLplus84]

look down. Plus i have a pump which i'm working on. I'm not sure if it's a Diablo or Phantom, but it's in a pretty bad condition, and i'm gonna fix it up and sell it

[Cory]

Originally posted by elTwitcho
I'm not gonna post any of my backup gear, but my main stuff is

PMI PE 68/3K Fiber wrapped tank
Vigilante with Low pressure spring
Shocktech chrome drop forward
Blue macroline with fittings
Low pressure modded Intimidator, dark blue/light blue fade
12 volt revvy clear
Neoprene Tank cover
And a buddy of mine will be making me a delrin bolt for my timmy

what gun do you use?

[blinkpk11]

Originally posted by elTwitcho
[Low pressure modded Intimidator, dark blue/light blue fade
[/B]

eltwitcho has an intimidator.

[nosights]

Here is some of my equiptment.

2000 cocker
2001 cocker STO (blue/purple fade)
Piranha STS with many upgrades
ELCD BooYah for Piranha
2 12 vlt revvys (1 blue, 1 black)
PMI ceramics for both cocker and Piranha
Dye Stainless for Piranha
PMI Razzor for cocker and Piranha
J&J custom with 10", 12" and 14" ends for Cocker
JT IZE Purple goggles
Scott ref goggles
Scott BadBoy goggles
PMI 4500 68 cu fiber HPA
NoName 3000 47 cu aluminum
Pure Energy 20 oz
4 scuba tanks and 1 co2 tank

[elTwitcho]

Yep, my intimidator, love o my life :)

[dawgs712]

Spyder SE
Custom Trgger Job
14' dye Boomstick
32 Degress barrel case
Perfect Electronic red dot sight
custom trigger job
proline fingerless gloves
32 degrees blue jersey
16 oz co2
remote
pmi 4+1 harness w/100 tubes
dye sticky grips
jt tool for jt mask (cant remeber typr now)
spare parts kit
pmi gun oil
parrel cleaner

pgp pistol
12 gram co2
barrel plug
3 ten ball tubes
holster
to those who dont know-the pgp stuff is up for sale.....

[MTU_Paintballer]

Blue Shutter
12" J & J Ceramic Barrel
Taso Turbo Valve w/ Pin
Lapco Cup Seal
Shocktech Springs
Shocktech Delux Delron Rear Cocking Bolt
Chrome NW Pball Drop Forward w/ On-Off
Blue Anoed ANS Gen-X Regulator
Clear 12 Volt Revolution
Blue VL-Bow
Blue Dye Sticky Grips
Blue Macro Line
A Drilled A.S.A.
A Polished Reciever Body
A Modified Trigger Assembly
Pure Energy 20oz. CO2 w/ Anti-Siphon
RardarChron-Very handy in adjusting for LP
Various Other Odds and Ends that aren't on my gun at the moment.

[Silent Knight]

[list]
Spyder TL+
12 volt Revy
200 round hopper
PMI 20oz Pure Energy Co2 Tank
Brass Eagle 9oz Co2 Tank
Proline Drop Forward
Macro line
SmartParts 16" All-American Barrel
JT Elite Alpha Mask
JT Thermal Lense (amber)
JT Sock Beenie
JT Power 2000 Gloves
JT Premier 2000 Gloves
JT Neck Protector
PMI 4+1 Harness W/100 round VL tubes
Modified Trigger

Stingray 2
SmartParts 12" Progressive Barrel
EagleWorks 12" Custom Barrel
Bottom Line block
Acrylic Ball Detent

[Skull]

OK guys now don't laugh....

Tigershark Crystal
12 in. Custom Products chrome barrel.
80 by 10 Marksman 6 in. scope. (silver)
silver 3.5 ounce CO2
VL 9v clear revolution
new rubber ball detent
Diablo Skull mask clear
Tacpro goggle skinz SKULLZ
Brass Eagle aromored gloves
padded gun case

[ryuujin]

- Spyder TL +
- 14 inch 32 Degrees Terminator
- 200 hopper
- 20 oz CO2 tank

- PT Extreme side arm

more crap to come

[Jake]

SPYDER Original
SPYDER Xtra (on the way)
200 round hopper
Remote with quick disconnect
CMI Tru-Flight barrel- 14"
2 Pod Harness
12oz tank
20 oz tank (on the way)\
DYE Stickies (also on the way)

[ptflyer]

shutter......kinda tricked....

[Keikan]

in my sig

[BALLSO'FIRE]

Outlaw 2000
16" custom products barrel
12 volt rev
20oz tank

[p8ntballer04]

I have a:

m98 custom (stock barrel) just got it 2 days ago
response trigger
viewloader hopper and elbow
tippmann expansion chamber kit
20 oz co2 tank
squeegie
cleaning equipment

[ds613]

Stock Smart Parts Impulse (stock barrel is a teardrop)

20 oz. Pure Energy co2 tank with Smart Parts on/off valve and anti-siphon tube

Scott Hotshot thermal goggles/mask

Clear 12v Revolution hopper

JT 4+0 pod pack with 4 32 degrees 100rd pods

Splat Gear barrel plug & Smart Parts barrel plug

[TeC]

2 Talons (one Tricked one Stock)
Bob Long Millenium (stock)
Model 98 (Rear Cocking, 12" ACI Zero Gravity)
Automag (12" J+J Ceramic, Double Trigger)
2k1 Autococker (ANS Front,Titanium Pump arm and cocking rod, Kapp Hammer Kit, Kapp angled VA)
3 Masks
20 oz.
2 12 oz.
9vt Revy

Angel and Nitro coming this summer

[pbplaya08]

my main gun is in my signiture and my back up is-
-2k1 vert feed
-boomstick
-ans front block system
-black ice reg
-stock trigger frame
-aremeggedon 47/3000
-12v
i also have a 2000 cocker for sale all stock and i have a dye stainless steel barrel and clear 9 volt hopper

[pbplaya08]

my main gun is in my signiture and my back up is-
-2k1 vert feed
-boomstick
-ans front block system
-black ice reg
-stock trigger frame
-aremeggedon 47/3000
-12v
i also have a 2000 cocker for sale all stock and i have a dye stainless steel barrel and clear 9 volt hopper

[MuckRaker]

Piranha STS G2
24 oz CO2 tank
micro line kit
proline drop forward
ACI four stage sub-zero X chamber
Smart Parts Tear Drop 12 inch barrel
Blue Dye Sticky grips
armor back half-finger gloves
JT harness, four 100 round speed pods and collar
Raven Nuvis gogs and JT nVader gogs
Raven Alien Lair Jersey
Raven Knee/Shin pads
VL 200 round hopper
lots of camo pants
too many hats
Not enough patience or money

[Richy_C]

Blue fade micromag, sp AA 20 anti sphion, Jacko 4 pot on the way, blue JT jersey, says Richy C on the back, blue pods, blue VL12 volt. Soon to come, Blue flex 7, And blue fade freak, butr on the other end od that freak is another freak, Blue freak factory impulse with anti chop eye, derlin bold, maxflo reg, Recapped maxflo, for grip, custom milling, and another freak on that gun, ME!!!!!

[topdawg85]

How much for the autococker with Dye Stainless Steel Barrel and 9 Volt loader?

[Incube]

M98 nyte stick rocket cock dye stickes be sight

raptor silver eagle nyte stick, be sight, 9v hopper , rear cocking, shortan trigger, dye stickies, pmi reg, bever tail black paint job, 3 9oz tanks one 20 oz redz pack (holds 500 balls) jt x fire mask 2 pairs of cammos and 3 cammo hats

i am buying a pro cocker soon in the summer.

[Edited by Incube on 04-22-2001 at 04:52 PM]

[DontKillWhitey]

I have a Talon ghost, Spyder Compact 2k, 12oz tank, bottemline, Unique spyder LVC Short, 2 barrel plugs, JT mask, and in the near future dye stickys and J and J ceramic.

[spyder1]

Well my main upgraded gun is the one right below, it has all the details, I also have other guns, pistols (splatmasters, ect.) laying around.

[ammoman]

rebel bottomline a week and 3 days old so its mostly stock but its also my first gun. :D :D wish me luck!

[paintballer56]

haha tiger shark sucks


i got

Tippmann98
flatline barrel
Pure Energy Compressed air 48cu 3000psi
+3 harness
3 guppies
Sidekick pistol
LOTS more but i forgot



Soon im going to invest in a impulse so refer me to good buys

[uu2233]

I Have a

Bruizer SOB with bottomline
2 Moly 9 ounce tanks
9 Oz Butt Plate
16" tru-Flight Barrel
Clr VL hopper (200 round)
straight squeegee
Stingray 2
Eagleworks 12" custom Barrel
stock barrels for both guns
JT Mask

[Paul]

GT Commando 2 (stock, its new)
9oz with smart parts on/off valve
12oz
hopper with camo cover
JT nVader mask
complete set of miltary BDU's :D
Stingray II
16" true-flight barrel

[Longbow_UMD]

Currently:
Stingray II
+Eagle Works 14" Barrel
+Starfire Bolt
+Acrylic Detent Ball
+Pull-pins
-Cocking Screw (hehe)
+Powerfeed
+VL-Bow
+VL200
+9oz. Cromolly CO2 + Buttplate

Surplus Swiss Alpenflage cammies
BE Xtreme Vision 280

Lined up for the 'Ray:
Trigger job
Bottomline
X-Chamber

In the stars:
AT85R
+Various craziness for it

[Edited by Longbow_UMD on 05-12-2001 at 11:54 PM]

[Kornithium]

Brasseagles talon w\ 45 round hopper.
Tippmanns Model 98 w\ starfire bolt, carbine stock, flatline barrel, and a bushnell reddot sight
Jt nVADER with all blue vent pods and red tinted thermal lesnse.
20 ouce c02 and remote system.

[mefunny]

look down there
|
|
|
|
|
|
|
v

[angeleyes]

i guess you can see on my sig. what im using at the moment but i also have a smart parts impulse(red)

99 shocker; splash,with turbo board and g-grip and vertical
mounted max flow.

2k1 vert feed cocker with all red a.n.s. pnumatics
red quick pull bolt, red genx2, red kapp DF, freak system

and some more....

[PB_Rhyno]

PMI Piranha G3 EXT Pro- Black
*VL Revvy 12v clear
* Dye Stainless Steel Barrel
* J&J Ceramic Barrel
* Paradigm Custom Aluminum dbl. trigger
* Dye Sticky Grip- Clear
* Paradigm Stainless Steel Hardware
* Paradigm Custom wound spring kit
* Paradigm High-flow valve & valve pin
* Paradigm laser cut sear
* CPP slidecheck
* CPP quick disconnect
* Paradigm Pro trigger job
* Paradigm Full internals polish
**** Parts on order- due Monday:
1) CP "Flame" df
2) Boo-Yaah ELCD trigger frame
3) CP Pro barrel kit
4) Ricochet 2k1 loader
5) Pure Energy 68/45k HPA tank
Also have 7-9-24 oz Co2 tanks

Personal Equipment:
* JT Proteus mask
* 32 degrees, JT, & Animal PB jerseys
* JT cargo pants
* Diggers shoes
* JT Gloves
Lots of other stuff I dont use much -or- at all that I keep to loan to newbies. My back-up gun is the same as my main except it has a G1 vtl body.

[bruboy720]

Model 98 custom
14" Custom 2 piece barrel
12 and 9 oz.Co2 tanks
200 round hopper
hoping to get response trigger and double trigger

[paintballmaster]

soon to be a red shutter
j&j ceramic 14" barrel
bob long cyclone 3 bolt
20 oz co2
vl 200 round loader
spring kit
jt spectra mask

[Incube]

Originally posted by PB_Rhyno
PMI Piranha G3 EXT Pro- Black
*VL Revvy 12v clear
* Dye Stainless Steel Barrel
* J&J Ceramic Barrel
* Paradigm Custom Aluminum dbl. trigger
* Dye Sticky Grip- Clear
* Paradigm Stainless Steel Hardware
* Paradigm Custom wound spring kit
* Paradigm High-flow valve & valve pin
* Paradigm laser cut sear
* CPP slidecheck
* CPP quick disconnect
* Paradigm Pro trigger job
* Paradigm Full internals polish
**** Parts on order- due Monday:
1) CP "Flame" df
2) Boo-Yaah ELCD trigger frame
3) CP Pro barrel kit
4) Ricochet 2k1 loader
5) Pure Energy 68/45k HPA tank
Also have 7-9-24 oz Co2 tanks

Personal Equipment:
* JT Proteus mask
* 32 degrees, JT, & Animal PB jerseys
* JT cargo pants
* Diggers shoes
* JT Gloves
Lots of other stuff I dont use much -or- at all that I keep to loan to newbies. My back-up gun is the same as my main except it has a G1 vtl body.

nice setup

[Incube]

Originally posted by Incube
M98 custom nyte stick rocket cock dye stickes be sight

raptor silver eagle nyte stick, be sight, 9v hopper , rear cocking, shortan trigger, dye stickies, pmi reg, bever tail black paint job, 3 9oz tanks one 20 oz redz pack (holds 500 balls) jt x fire mask 2 pairs of cammos and 3 cammo hats

i am buying a pro cocker soon in the summer.

[Edited by Incube on 04-22-2001 at 04:52 PM]
i got rid of ye ol raptor so my m98 has a diferant setup now

M98 custom nyte stick, rocket cock, dye stickes, be sight 9v hopper, pmi reg. i also have go a 12volt 2 12oz. i forgot them i also have a trigger job dubble trigger!