I'm leeaaaking

[BlackMageHell]

My C02 is leaking like crazy! I have a pirahna sts and the C02 is leaking from the part circled in the picture, HELP ME!!!

[Dermen]

The part circled is the low pressure chamber. Take it off and check the orings. If you have a ram air chamber (which you should. If you dont know look at the end towards the front of the gun. If it has a hole in it then it is a ram air chamber) there is also an oring inside the chamber on a piston. Be careful putting the piston back in or you will damage the oring.

[BlackMageHell]

I dont have RAM air and my low pressure thing doesn't have an o-ring (it never did and it worked before)

[coffeeboy29]

no no no, its a ram air low pressure chamber. ( or something like that) there should be an oring in there unless its just a normal low pressure chamber, but they dont come wtih piranhas...just check again.

[Dermen]

Is your STS a G2 or a G1. If it is a G2 then it should have come with a ram air chamber. If it is a G1 then it should still have a lp chamber. Unscrew the LP chamber from your gun. There should be an oring in the hole you took the LP chamber out of. Check it. If there isnt one put one in there and it will probably fix the leak.

[Cracker344]

this problem is easily solved for me, when u take out the chamber the should be some o rings on the big peice probably 2...right(check to see if they are cut or broken)? then there should be a black peice with a spring and a four star. rearange these peices check for wear and tear, if any. then put it back together and see if it works. it did 4 me. (if all else fails take it to ur local store)

[BlackMageHell]

Yes I decided to simply take it to a local store, the o-rings probably fell out somehow (or they were never there and somehow the gun worked) because I dont see any broken o-rings, just missing ones.