Help!!!

[ctrain24]

I just bought an EQ board and used a dremel to file down the piece of metal where the eye goes. However, I accidentally touched the inside of the chamber with the dremel and there is a small hole in the chamber going from the eye hole into the chamber like a ramp. Will this affect performance of my gun?

[Azn_Boy]

so wat do u mean?....did the file like goes through the eye hole and inside the gun and u made a ramp looking thing inside or wat??

[toothpastedog]

no, it might cut the bolt up a tiny bit, but it you shoot the bolt in the gun about 4000 times, then even if you need to buy a new bolt, the groove will have been worn down enough so it will not be a problem any more.

[ctrain24]

So when I color in the area I filed down with a black sharpie, should I also color in that area in the chamber where I messed up at? Thanks for the help!

[toothpastedog]

yeh, it will most likely get rubbed off by the bolt, but i would do it anyways. good luck.