PDA

View Full Version : reg not unscrewing


Babboa
12-13-2004, 11:43 AM
i can get the bottom half of the reg to unscrew, but the top part that the manual labels as part #52(reg top/ASA) won't come unscrewed from the front block. I am trying to install my new Vigilante reg, and i have tried everything short of a vise and pliers to get this thing off. I do have to remove it to screw in the new reg, correct? any ideas how to loosen it up? I don't want to screw it up too bad because i am selling the old reg and drop to my cousin for use on his dragunfire.

clown_13_2001
12-13-2004, 12:24 PM
You are going to probably need a vice because the reg is most likely loktited in.

Babboa
12-13-2004, 04:17 PM
in that normal? Every other stock gun i've ever used, the reg/x-chamber/gas-thru grip wasn't put in with anything other than elbow grease and maybe a litle teflon tape. It is the stock reg that came with the gun that i'm trying to remove, in case i forgot to mention it.

clown_13_2001
12-13-2004, 04:38 PM
Originally posted by Babboa
in that normal? Every other stock gun i've ever used, the reg/x-chamber/gas-thru grip wasn't put in with anything other than elbow grease and maybe a litle teflon tape. It is the stock reg that came with the gun that i'm trying to remove, in case i forgot to mention it.

My x-chamber on my imagine was loctited in. It takes quite a bit of force.

KA Ben
12-13-2004, 06:51 PM
Get a piece of rubber and wrap around the reg and then take your pliers and try to unscrew it. It will prevent scratches and gives the pliers a better grip. This is what I did and it worked without any problems.

dmt4595
12-14-2004, 03:57 AM
heres what i did -
remove the front block from the gun
take a piece of rubber or something and wrap it around the top part of the reg
clamp a vise grips on it really tight so it wont slip at all
hold onto the front block, use the block/volumizer as a handle
tap the handle of the vice grips on the ground, so that the reg will twist off - the shock should help break it free easier.

kb9wgx
12-14-2004, 07:53 AM
Put your V/A in a vice, and use a strap wrnch to unscrew the reg. If it's loctited in, you may need to heat it up to break it loose!

steveo1313
12-14-2004, 12:39 PM
that happened to me so i put my moms dishwashing rubber gloves on and got it