What does intellifeed do?

[AutocockerFreak]

Just as it says in the title, thx

[VeNoM]

makes the revvy spin every time you fire, rather than waiting for a gap in the feed tube.

[filasophikal]

the cobra board.... will the paddle spin on every shot, while the stock board.... will spin every two shots. with the stock, shoot two, so the paddles can spin.... also a good mod for the revvy is the ball whacker mod (if you have time), or the evil impellers, or the vortex impeller.

[Crash]

Originally posted by filasophikal
while the stock board.... will spin every two shots. with the stock, shoot two, so the paddles can spin....

Actually, it doesn't exactly spin with every two shots. It's activated when a string of shots (two or more) is over two balls per second.

So, if you shoot more than once in a second, it's activated. If you shoot once, then wait at least one second and fire again, it won't be activated.

[AllOleander]

What do i keep hearing about an "intellifeed" mod that you use the batteries from your hopper ??

I thought i knew what an intellifeed was and i probably do, but some ppl have said some things to slightly confuse me :(

[filasophikal]

that's the extreme intellifeed mod... when intellifeed installed it runs (i think) 6 volts, with the extreme... it pushes it up to 12. supposedly it spins faster, or something. i heard of some intellifeeds mods to.... but the one that most people know of is the one right out of the owner's manual.

also, yeah after i posted it, and re-read it a day later... i missed that it spins (after 2 or more shots).

[shootfirst]

I just istalled an intelifeed onto an LCD angel.
Normally it connects from the LCD board directly onto the motor servo of the rev. loader. So whenever more than 2 balls per second are fired it puts 6V from the angel's battery onto the motor (so it spins slower than a 9V or 12V rev). Typically you are supposed to remove the batteries from your rev. Because if you don't, current from those batteries will run down the new connection you made and onto you LCD board.

But there are places on the internet that show you how to connect a simple diode (about $1 from radio shack) so that you can have both connected. Meaning that your rev will work the same as before (paddles spin when there are no balls in the feed tube), but on top of that anytime you fire the gun > 2 balls/second the paddles will spin.

[BuNkEr_BuStErZ]

Im sorry to interupt, but isn't intellefeed slower than a Turbo Rev. i see many people with the Intellifeed and I cant see why people buy them when the turbo rev is faster and usually never breaks balls with the JMJ Vortex Impellers which I Love. i dont particularly care for intellifeed it looks kind dumb too
:D