A little help please

[yoda101]

So my project is done being milled and should be sent back to me very shortly. My next step after that is to get PDS installed on it. The problem I am running into is what to do with it anno wise. I will be posting a picture of it later and any suggestions would be welcome. I have some ideas but nothing firm and would like to get opinions of others as well.

http://www.wideopenwest.com/~tomchukj/body001.jpg

[JustBunkered]

:eek:

[coolrazer]

Originally posted by JustBunkered
:eek:

[slink1]

cool milling i hope the rest goes well

[yoda101]

Originally posted by JustBunkered
:eek:

thanks but as always u aint any help :P

[BunkerBuddy_666]

Nice! :eek:

Where can I get me one of those?

For the anno, i would go with a black to gold dust fade.

[Everlight389]

Very nice job there. And black is where it's at ;)

What exactly are you asking? Where to get it done, or what color?

[Kowz_76]

Dust = teh ug. Get a gloss fade. It doesn't really matter what, because that body is totally secks

[Mafty]

get a unique color combo, everyone else has all the basic color combos get like black to orange or black to pink or something unique and will stand out.

[yoda101]

Originally posted by Kowz_76
Dust = teh ug. Get a gloss fade. It doesn't really matter what, because that body is totally secks

with as many cuts that were done the body I am worried a polished finish would show to many of them. Dust is easier to hide imperfections.

[yoda101]

Originally posted by Everlight389
Very nice job there. And black is where it's at ;)

What exactly are you asking? Where to get it done, or what color?

Just anno ideas thats all. I have anno'd most of my markers in the past so I know who I am going with just not sure what i want to get done yet

Originally posted by BunkerBuddy_666
Where can I get me one of those?


thats why its called custom milling :) you cant

[BunkerBuddy_666]

Ill give you 300$ for it then!

[JustBunkered]

I would say a matte body with gloss parts. I think a fade would not look good on there because of all the milling

[etmydst]

a blue to gold fade would look great with the teardrop thing you got going on.

[yoda101]

Originally posted by JustBunkered
I would say a matte body with gloss parts. I think a fade would not look good on there because of all the milling

thats where i am leaning right now, either midnight blue/gray or white/black. Not the whole body 1 color either basically accents

[ShootPaint]

I personally would do the receased cuts in either a dark color then the body in a light color or vise versa to make it stand out. A fade would simply hide all the detailed milling that you have had done.

Me personally I would probably do the recessed cuts in a satin black and the rest of the body in a eletric blue or even a MD yellow. I think either combo would make your mill work stand out.

[Bigshot]

Rasta

[SLK]

Originally posted by ShootPaint
I personally would do the receased cuts in either a dark color then the body in a light color or vise versa to make it stand out. A fade would simply hide all the detailed milling that you have had done.

Me personally I would probably do the recessed cuts in a satin black and the rest of the body in a eletric blue or even a MD yellow. I think either combo would make your mill work stand out.

I am with shootpaint on this one.
You need to draw attention to the milling. it will make it look much better.

[lotus_esprit5]

yeah, maybe do the teardrop milling one color, the gun another color.

Or you could do an orange/blue vertical fade (orange on top, blue on bottom). You'd probly want to get all your parts done for that though. Not sure if you're looking to anno the whole gun or just the body.

I like dust annos. Alot more unique, doesnt show scratches as easily, cooler IMO. but thats just me.

[yoda101]

Originally posted by ShootPaint
I personally would do the receased cuts in either a dark color then the body in a light color or vise versa to make it stand out. A fade would simply hide all the detailed milling that you have had done.

Me personally I would probably do the recessed cuts in a satin black and the rest of the body in a eletric blue or even a MD yellow. I think either combo would make your mill work stand out.

that is where i am leaning but like i said white/black or gray/blue

[ShootPaint]

Unless you know something I dont you cant get a white ano.

I have did a fade on a fish bone B2K a while back and we got close to a white by bead blasting the body and then doing a clear ano on it but it looked like a speckled white gray mix.

[yoda101]

Originally posted by ShootPaint
Unless you know something I dont you cant get a white ano.

I have did a fade on a fish bone B2K a while back and we got close to a white by bead blasting the body and then doing a clear ano on it but it looked like a speckled white gray mix.

thats basically what i mean when i say white, sorry for the confusion

[RainTreeBoy]

I'm not sure how it would look on the gun, but gray and blue sound pretty cool. Could anyone photoshop that to get an idea or something?

[yoda101]

anyone got a 2k3 trigger frame they will sell? Just remembered that I sold my older frame and dont have another to replace it.

[JustBunkered]

Originally posted by yoda101
anyone got a 2k3 trigger frame they will sell? Just remembered that I sold my older frame and dont have another to replace it.
um we do have such thing as a b/s/t, you are lucky i dont report this to an admin and get you banned ;)

[yoda101]

well she is finally home... took some quick snap shots will have better picks when she is completely done.

http://www.wideopenwest.com/~tomchukj/b2kb.jpg
http://www.wideopenwest.com/~tomchukj/b2kc.jpg
http://www.wideopenwest.com/~tomchukj/b2kd.jpg

[lotus_esprit5]

is that with the anno? Or is it just prepared for a dust anno? looks very smooth, totally different from those first pics you posted like a month ago. It turned out really well :cool:

[yoda101]

Originally posted by lotus_esprit5
is that with the anno? Or is it just prepared for a dust anno? looks very smooth, totally different from those first pics you posted like a month ago. It turned out really well :cool:

hasnt been anno'd yet just bead blasted

[Pbkid39]

Looks sweet! :cool: Can't wait to see it all annoed and put together.

[lotus_esprit5]

well I'm thinking if you havent decided on an anno yet, something involving silver would be cool. Maybe a blue/silver or green/silver or something.

[JustBunkered]

beauty