help me

[pbstar14]

hey guys i need help,i just got my cp reg andi set the reg to 180-200 and then i tried to set my lpr,but the solenoid wont leak, so i can set it.i tried to shoot it and the velocity is very low when the lpr is turned all of the way in.i dont know if it is the lpr, the solenoid, or the lpr needs to be lubed or something.please hlp me.

[ShootPaint]

I dont know what upgrades you have or what year your marker is. This information is important in us being able to suggest propblems that may arise for you.

After reading your sig I am going to guess that you have a 2K4 without a after marker valve. If this is the vase then your HPR is set way to low and this is more than likely the reason you cant get the marker to speed. I would up the pressure to 250-275 psi then adjust your lpr accordingly.

If you dont have a 2K4 then your hpr, without a aftermarket valve installed, should be around 225-250 psi.

In any case it appears to me that you dont have a aftermarket valve and in turn you are trying to run the hpr at to low of a pressure for the marker to operate properly.

[BunkerBuddy_666]

Originally posted by ShootPaint
you are trying to run the hpr at to low of a pressure for the marker to operate properly.

That was my first thought. Turn up that hpr another 50 psi.

[pbstar14]

thanks, i did what shootpaint said and it worked.