Help me!!!!!!

[cranberynvodka]

i field striped my shutter and while i was puttin it back togetter i got a piece stuck inside where the bolt would be its like a big oring type piece but its sittin all the way at the bottom and i dont know how to get it out

[A damn fool]

just stick something long in and pull it out. What u got stucck is a black thich oring typ of part, it goes in front of the striker. Just get something long and pull it out, like an allen rench, scre dryver, e thing that is long and wil fit.

[cranberynvodka]

i cant its stuck all the way at the bottom by the valve body and i tried takin the lowpressure off and the vertical thing but i cant takke the valve body out

[ptflyer]

to get the valve body out.....you must take off the grip frame and under it is a brass set screw....take that out.(it is the valve set screw)..now with the back of a pencil or somethins made of wood ..NOT METAL...push the valve out from the back out the front.....and the striker buffer..(the big black O-ring should also come out......when you put it back together onlt screw the valve screw in until it is flush with the body of the gun.....then remember the striker goes in first than the spring,.then the buffer.....then the guide..then the little metal disk..then the velocity adjuster....Hope that helps......

[cranberynvodka]

yea but then how do i get the valve back in does it just automaticly stop where it needs to

[ptflyer]

yes..if you look in the tube..you will see a pin.that is the valve body stop....

[cranberynvodka]

thanks man u helped me alot but 1 more quetion does it mater what side the valve body is on

[ptflyer]

yes...small hole to the back...large hole foward....and No Prob.


and you can check out my shutter....on the new pic tread....;)

[cranberynvodka]

yea but then how do i get the valve back in does it just automaticly stop where it needs to

[ptflyer]

yeah.just oil up the o-rings,,,,,and slide it in til it stops.....also remember the small hole on the side of the valve body points down...that is where the valve set screw goes into..

[Dräko]

What about the valve pin? Thats what keep me from getting mine out

[ptflyer]

ok..listen..the valve "stop pin.the pin that stops the valve body from moving to far back in the tube......is a pin that goes across the tube....and is pressed into the body.the only way to get that out is to tap it out...no need to take that out.....the valve pin.has the cup attached...


so what are you asking about Drako?

[cranberynvodka]

lol i thought i was the only idiot who had this problem

[Witt]

WOW dude..Thats smart...j/k Id just shake shake shake...Shake that shutter, :):):)

[cranberynvodka]

yea thats what i did for a long *** time but it was stuck all the way in

[Intruder]

Why didn't you just take something that was curved like a hook and put it into the back of the body, get it around the thingy and pull it towards you. Maybe that wouldn't work, I don't have a shutter.

[cranberynvodka]

it was all the way in there by the body valve but it doesnt matter now a damn fool and tlplus helped me get it out