low prs kit

[xxxtippmannxxx]

if i buy a low prs kit for my tippmann can i use a stock on it

[E r y k]

you can use some stocks... but not the stocks that require the end cap area to be installed.

[sniperdude9]

I dont think so because the low pressure kit changes the gun to rear cocking i think

[P8intballer13]

get the lpk and ditch the stock. stocks just make the gun more comfortable. Hardly affects performance at all. the lpk increases accuracy greatly combined with a hpa tank and a regulator.

[xxxtippmannxxx]

Thanks Man

[P8intballer13]

np

[E r y k]

a reg and HPA tank should suffice... the LPK isnt really necessary... unless u like to blow 100 bucks on it.

[benhmn]

Are you talking about a 98 or an A5? You can use an LPK and stock on an A5 at the same time.

[xxxtippmannxxx]

its a 98 custom

[TomMitchell]

ok, here is my setup... I have
-tippmann A-5
-Flatline Barrel
-Low Pressure System (minus the regulator)-(figured out it didn't come with the lp kit after i got it)(but is in the mail)...i got the tippmann A-5 regulator to add on the bottom of the supplied vertical adapter.
-N2 tank is in the mail also with the regulator. ( got a pure energy 48 ci 4000 psi tank)
-Richocet - Ricochet R5 hopper (mostly for looks)
-Hot shot, red dot sight

Now heres my question if i don't use the regulator and buy a palmers stablizer and put that in place of the regulator what effect will that have on my gun. is this a good idea or not. sounds good to me but i'd like your opinions. I mean money isn't an object so suggest what you think is most approitate for my choice in upgrades.

Next question, i'm getting a rear velocity adjuster(rva) and i'm wondering with the low pressures system and the rva working together what should i set my velocity and all that good stuff at ?

Next question, if i do get the stabilizer to put in place of the regulator can i add a gauge still. I will get one if i don't get the palmers stabilizer, i'm wondering if it's still possible to get one if i can get the stabilizer and lp kit together.

(attached is a picture to show what i'm talking about in the first question)
Needs help
-Tom

[Cool_Clay1]

You Can put a Gauge on the Stablizer or you can put one on the bottom of the LP kit were theres the screw on the bottom of the Lp chamber