what barrel should i get for my shutter

[cranberynvodka]

plz help me

[Richy_C]

4/5 of those barrels are unjustifiably long

[cranberynvodka]

so ur saying i should get only a 16 in

[Richy_C]

nope, 18 inch is no better that 12, thats just 6 inches of more barrle to slow down your movement

[cranberynvodka]

isnt it more acurate when its longer and doesnt it make ur ball go further

[A damn fool]

only on the two stepped barrels. The bomstick has a smaller begining, i tihkn its 6 or 8 inches on every barrel, and the rest is just the alumiunm part of the barrel. It is only more accurate on a two stpped barel. This occurs because the paintbll is shot throught the smaller paret, and then expands in the larger part. If u want a boomstick, get a 14 or 16 inch, 18 wont helpo u as much as it s going to be a pain in theass. As for one step barrels, 12 to 14 inches ins plenty. Id go with a 14 or 16 inch bomstick, and then ur next choise should be a 14 inch j&j. This is with my own personal experience with these barrels on the shutter.

[cranberynvodka]

14 inch j&j what o yea u know on that trigure job that tlplus wrote how would i get the clothe or whatever down there without it falling out

[dawgs712]

take a paper clip and make it straight and dab the glue on the end and put glue on the bottom of the clothe that touches the pin. touch paper clip toyou have to lift the sear to get at it and rest the clothe with the paper clip. When it is place let go of the sear and it should hold.

[cranberynvodka]

yea i did that but without the glue but i didnt feel n e differce in my trigger pull

[Witt]

I love the Dye Stainless. Its great for Shutters. I would put my money into it.

[dawgs712]

cranberrynvodka, just gradually amke it thinker until it does. i agree, it is a fin line between not being able to pull it and not making a difference

[cranberynvodka]

yea i had it at to big where it wouldnt cock but now when i cock it i cant hear the click but n e ways im trying to figure out tl pluses trigur job thing what is a eproxy music wire or whatever he was talkin bout

[cranberynvodka]

is the dye stainless better then the boomy

[A damn fool]

no, its heavier, and not two stepped. Invest the twenty bucks mor ein the boomstick, its great.

[Richy_C]

freaks are better but u wouldn't know how to use it

[Hsuve]

Go with a 12" DYE Boomstick, great barrels and shoot well if you have the right paint match. Be SURE to bring a squeegee though.

[Intruder]

get a 12 inch or 14 at the most, after that there is friction.

[hewy10]

i think that an 18 or 16 inch barrel is way too long i would personally go with a 12in boomstick or at least that is what i ordered. buy a quality barrel not a long one

[cranberynvodka]

thanks i always thought that longer was better but i guess not ill prolie go with the 12 inch boomy

[Intruder]

good choice, that is what i'd do too.