WAS problem

[paintballer930]

MY eye is not reading the paintballs but it will read my finger, sometimes when my loader is off it will read them but not when it is on. Do I need new detenients or what plz help.

[Team Chokepoint]

Have you tried adjusting your eye sensitivity? Its the last setting, flickering orange. Lower = more sensitive.

Your detents could be the problem if balls are moving so far forward that the eye doesn't register them. Do you have a forcefeed hopper?

[paintballer930]

yes
i have a halo

[dingleberries]

here is a couple of questions:

~Does your Halo have a clear shell?

~Is your eye sensitivity too low? (set it to like 10-12)

~is the bur filled down all the way?

~and is the raw aluminum that is showing colored black with a permenant marker?

[paintballer930]

I filed down my bur all the way and I colored in all of the silver, my halo is black.

[ikey]

your sensitivity is not the problem. the eye will think there is paint when the hopper is off because the eye is picking up light that gets inot the feed neck. with the hopper on, the eye cant pick up random light. this menas that your sensitivty is maybe even a little to low. ok, what color bolt do you have. with a black bolt, your gun should blink green about 1 time a second. with a white bolt it should blink green at about 2 times a second. get a manual, if your board is not doing what i siad, look in the maunal and change the eye mode. this should work as long as you installed it right. check the wires and make shure they are not damaged.

[paintballer930]

It works now that I made the eye more sensetive, thanks guys