I Mortaly Hate My Bushhy!!!!

[ATOMIX12]

:pissed: :pissed: I HAAAAAATE IT!!!:pissed: :pissed:
well i got the gun a while ago and when i first baught it o yea its a B2K3 and it looks cool but it TOTALLY SUCKS EGGS!
ok heres the story... i get the gun out of da box. i get a 4500 preset tank for it and a drop forward, so i put a revvy loader on it an the x board..yea i know ...the x board doesnt mean n e thing lol WOOT! but n e way.. so i get this thing all set up an i go play w/ it for 2 weeks. and for a time... it was good... but then after my hmmm 2nd or 3rd time playin w/ it the stock regulator just crapped out on me so i went an had it looked at... well the store manager at my local shop said that the reg was bad and it kinda sux n e way so i mowed a few lawns for ungreatful twits around my block to save up for a new one, i get the bob long torpedo reg for it.. and it works GREAT! but like any good thing it went sour as fast as it was good... and sumthin else decided to break... this time the bolt chopped off the edge of the PDS which should NOT happen ok... so yet again i go and save up some dough and get a shocktech superfly bolt so.... now its workin primo again.. BUT WAIT THERES MORE! after a few more times playin (3 or 4) i realize i obviously out shoot the hopper badly...so here i am savin up MORE MONEY FOR THIS STOOPID THING so i get a new hopper i got the empire reloader B and anyone who likes halos better can GO AND DIE! this hopper ROX! so n e wayz i got a lil extra b-day cash so i got a new 2 piece CP barrel and a new vertical feed cuz my hopper kept comin off i got one with o- rings on it.... so now ive spent the EXACT AMMOUNT ON THIS STUPID GUN AS I WOULD HAVE SPENT ON A TIMMY OR SOMETHING USEFUL!!!:pissed: :pissed: :pissed: so........ i go and play with my dad whom by now sees the problems i got with my bush so he goes out an buys himself a BRAN SPANKIN NEW 05 Angel Speed(very niiiice gun i recomend it!)(o yea... of course i play with his gun now lol but he wants it back so...im skrewd...well actually not im gettin a bob long ripper 05 now so im happy) but n e wayz i play against my dad and he whipps my arse cuz he can actually shoot 10 feet in front of him lol my gun wont shoot hard..cuz it SUX! and when i do get it fixed the eyes just figured they went on strike cuz they aint detecting ANYTHING! and i end up spraying paint better than a CAN OF SPRAYPAINT! yes... my gun chopps more than a weed whacker! so in conclusion..... if any of you ever think about getting a B2K3 or BKO they both encounter expensive problems and wont work when u fix em so DONT BUY THEM!!!!! TRUST ME! DONT DOOOO ITTTTTTT!!!!! ok this iz my review on ICDs gun :) have a nice day...

[supernothing76]

what:confused: :confused:
that story makes no sense

[BunkerBuddy_666]

Right, so you're saying you suck, and can't maintain a B2K properly? Hey look, it's another nub with a friend/sibling with an angel and bragging about how good it is! You are wayyyy over exagerating. Its like me saying viagra made my weiner 3 inches thicker and a foot longer. (Cause it ant' gonna happen)

[pbdan9190]

You were running a Revvy. It's no surprise that you might run into some problems. If you're using a Reloader B you should do the detent mod so that the loader won't force the balls past the detent, which is why you are probably chopping now. I'm also guessing you have no clue how to set your regs either, so I would definitely take a look at that. People here would be more than glad to help you, but at least TRY to type in English.

[Hekrill]

Wow. Looks like some one doesn't know how to read.

[Tab8715]

Originally posted by ATOMIX12
:pissed: :pissed: I HAAAAAATE IT!!!:pissed: :pissed:
well i got the gun a while ago and when i first baught it o yea its a B2K3 and it looks cool but it TOTALLY SUCKS EGGS!
ok heres the story... i get the gun out of da box. i

1)Step away from the keyboard

2)Get a account on Ebay

3)Put the gun up for auction on ebay

4)Ship the gun to the buyer

5)Buy a tippman

[nirvana1234]

Originally posted by Tab8715


1)Step away from the keyboard

2)Get a account on Ebay

3)Put the gun up for auction on ebay

4)Ship the gun to the buyer

5)Buy a tippman

lol so true because if you cant handle a bushy how the heck are you going to handle a timmy.

everything that was mentioned is totally fixable.

u are complaining about having to buy a new hopper because the gun is to fast for it:rolleyes:

you would of had to buy a new barrel for a timmy or angel anyways and the reg prolly could have been fixed if you didnt want to take the easy way out and buy a new reg(even tho the reg you bought isnt really all that great anyways...)

please just stay out of this forum unless you have a real question or grow a brain stem

[ShootPaint]

1)Take a deep breath and relax

2)PM ShootPaint

3)Except his $50 offer for your so called horrible marker

4)Ship the gun to ShootPaint

5)Buy a Timmy and find out it is the same design as a Bushy.


The reg is completely rebuildable. It could of had a complete overhaul done on it for around $10. Chances are it didnt even need this. It simply needed a little lube to get it working right.

The eyes chopping off. Well there is no way the bolt can contact the eyes. Absolutelty none. The eyes are put in a holder that is then fitted to the marker to ensure proper alignment between each eye. This keeps the eyes recessed in the boddy of the marker. They dont stick into the breech of the marker at all. The only way they could get all the way inside of the marker is if someone removed the holders they go in.

Now lest see the hopper. Well do we really need to cover this? Might as well. You are shooting a marker that is capable of 25-30bps and you elected to use a hopper than can only feed 13bps on its best day. The hopper needs to be upgraded. This is no fault of the markers. You picked up a good hopper in the Reloader.

And finally you mentioned the eyes quit working. Correct me if I am wrong but you said earlier in your post that the ends of the eyes got cut off by the bolt. No where did you mention that they had been repaired. If that is the case no wonder they dont work.

If you did get them repaired I would simply ask the person that repaired them to replace the emitter. If you think these eyes are bad you are in for a rude awakening. These are the exact same eyes that are used in the Timmy's.

[xtempestx]

ummm, dunno whats wrong with you but
1. Learn how to type and use english.
2. How the heck does a bolt chop an eye, never heard that one before.
3. Did you even read your user manual?
4. I have a BKO that works great, so I assume the full Bushmaster would work better.
5. Dont go saying that just dont know a high end gun, my main marker is a DM-4.
6. Yes, the 05 speed is a nice gun.

And uhh, if you had to mow lawns to buy a reg, how excatly are you paying for a $1500 gun?

[jakeiscared]

Originally posted by xtempestx
And uhh, if you had to mow lawns to buy a reg, how excatly are you paying for a $1500 gun?

i would like to see the awnser of this question.

[supernothing76]

HE pm'd me lol:laugh:

ATOMIX12 wrote on 04-14-2005 02:34 AM:
it makes perfect sense.... i baught a Bushy and it breaks... i fix it... an it breaks in other places... like when u poke looooots of holes in a garden hose.... nomatter wut... it will leak... its the same concept... bushys are worthless.../hopeless...and i HATE mine :)

[spyder freek]

well if he does it my way....prostitution or selling drugs:rolleyes:


i dont do that....i just dont eat lunch.

[RainTreeBoy]

And people wonder why Bushies have such a bad rep. I'm beginning to think the manual is written in Korean.

[I'm_Addicted]

Wow. You said it doesn't shoot hard so it sucks. SHOOT HARD. Don't hate on ICD cause you don't know how to properly maintain a marker. Your Dad probably buys you all your stuff.

[jakeiscared]

Yea my bko doesnt shoot hard. It must be a common problem with ICD guns.

just kidding guys..

[spyder freek]

its a common problem with noobs who cant read a manual......

"ERrrR maybe if i turn the pressure down my velocity will be ubber sweet.....hey wait im getting 3 feet for range....."

[lotus_esprit5]

http://logic.dnsalias.com/pictures/john%20sherer%20-%20you%20suck.jpg

[nirvana1234]

Originally posted by lotus_esprit5
http://logic.dnsalias.com/pictures/john%20sherer%20-%20you%20suck.jpg

lol nice

[TehMarker]

The part of the story that vexes me the most is how hell did you get the BOLT to chop the PDS? I mean, I understand the reg being crap, but the PDS was ALL YOUR FAULT. The PDS should never even TOUCH IT! In fact, I think you've made up the entire damn story. The little bit about
(o yea... of course i play with his gun now lol but he wants it back so...im skrewd...well actually not im gettin a bob long ripper 05 now so im happy)
I think you fabricated the entire story to celebrate your recent entry into puberty. Apparently you've just entered the higher level marker range. If you remember nothing I say, remember this : GENERALLY, the higher the amount of money you spend on a marker, the more you will experience issues. You hear about people with Spyder's that have their marker's last a year or two, then you talk to one of my DM4 friends and they'll be happy when it's working for 3 months without some issue. ****e happens no matter what brand of marker you buy.
To conclude my post...paintball shouldn't be your main focus at the moment, it should be upping those typing skillz of your's. :laugh:

[lotus_esprit5]

alright. Now that I'm not so pressed for time and can type an actual response...
the stock regulator just crapped out on me so i went an had it looked at did you try lubing it or checking the o-rings before the shop person made his (probably) uninformed and incorrect decision that the reg was totally fubar?Would have saved you some money.
this time the bolt chopped off the edge of the PDS which should NOT happen no it didn't. The eye LEDs are not long enough to poke all the way through the recessed holes in the side of the gun in which they sit. If your LEDs took some Cialis and magically grew then maybe you should keep them away from your stash.
so yet again i go and save up some dough and get a shocktech superfly bolt how would that fix anything? The Shocktech bolt is just like the stock one, except it has aluminum inside it making it heavier, and a venturi face, which does absolutely nothing. And I though your problem was with your "broken" PDS, so how would a bolt fix that? Good job, you just wasted another $35.
so here i am savin up MORE MONEY FOR THIS STOOPID THING so i get a new hopper i got the empire reloader B How is this the gun's fault? You're complaining that the gun is fast? :eyes: You say later that you want a Timmy. Are you aware that you would need a Reloader B for the Timmy also? This isn't money that you're spending because you bought a bushy. Its money that you're spending because you bought a fast, expensive gun that needs better equipment.
im gettin a bob long ripper 05 now so im happy Do you realize timmies use the same design as bushies? If you couldnt maintain and set up your bushy, you're not gonna be able to take care of a timmy either.
lol my gun wont shoot hard you realize you sound like a noob. "His Angel shoots harder than my tippmann, I dont wanna play against him!" I hear that at the field all the time. You dont know how to chrono your gun. That is sad. If you hate your gun so much, send it to me, I'll pay shipping, and it'll hang out with my B2K3 (which works perfectly well because I'm not retarded) . :cool: