Talk About User error...eek

[spyder freek]

Well, for the first time one of my mods has gone .... bad. Well, i did a high flowing ram mod, the extra holes in between the stock one. Now how far off would these things have to be to cause issues with my gun? like there not to terribly but i get a leak in the noid area, so i checked the noid pressure and when i did i depleted the last of my air....:eek: so no testing for a day or two i guess.
(lpr has creeped in the past so i waba naje sure) I could feel air comming from the top of the trigger, so i thought that it was leaning twards an over pressurized noid. if it were the ram it would come out the top or something. The gun cycled fine, but i quickly degassed because of the substancial leak and worry of the noid.
Main question tho, how far off is to far off....Yay a void warranty, new cylinder in the future?

[cutomcocker1]

most likely the only link between your mod and the leak is the fact that you took the gun appart. i think the gun just doesn't like you so it decided to **** up when you took it apart.

i'd go ahead and lube the regs and lower the LPR a bunch...then lube the noid gasget and put the screws back on snug. not sure really what the prob is though...

[spyder freek]

It was the mod, i tryed a stock ram from sum 1 at the field and it worked fine....then i went home and looked at it some more. my holes definatly wernt the best and one of them was to far forward i beleive. but all i had to do was snag a larger ram buffer, it made the out of ewack hole not matter because the ram shaft didnt go back that far.


Problem solved